So, the Currie steering parts arrived and I changed them, did an alignment as per
http://www.stu-offroad.com/ left about 1/8" toe out, Since I was under there I thought I would do the steering stop mod to keep the Tires from rubbing the Control arms. Problem is the steering doesn't go all the way to the stop when turned all the way to the left
I tried moving the stabilizer in case it was bottoming out but no luck. Also there seems to be a little to much play in the steering wheel before the tires start to move, also on the way back from MB. the Jeep did seem to wander very slightly. (due to the toe out?)
I was wondering if one of the more tech savy guys ( maybe Bnine ?) could take a look and make any suggestions?
Topic: The good,the bad, & the ugly (Read 2590 times)