Calgary Jeep Association

Author Topic: RE Joint Tool  (Read 919 times)

0 Members and 1 Guest are viewing this topic.

Offline BEZZ

  • Budget Lift
  • Posts: 197
RE Joint Tool
« on: January 16, 2009, 03:59:57 PM »
Hey guys,  I am rebuilding some control arms I bought this week and I was wondering if anyone has the large RE joint tool I could borrow...I bought the small one but I didn't get the large one. Let me know.
Buy some safety glasses.
You can jackoff with a fake hand but you cant see out of a glass eye.

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: RE Joint Tool
« Reply #1 on: January 16, 2009, 04:13:27 PM »
Hammer and punch is all you need.
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline BEZZ

  • Budget Lift
  • Posts: 197
Re: RE Joint Tool
« Reply #2 on: January 16, 2009, 05:31:00 PM »
They standup pretty well to that Billy?
Buy some safety glasses.
You can jackoff with a fake hand but you cant see out of a glass eye.

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: RE Joint Tool
« Reply #3 on: January 16, 2009, 09:05:14 PM »
I used a punch before also and it destroyed the holes on the ring. You can find one of these tools at a cycle shop .. they used them on bikes. it's like $20 and it does not destroy that little ring and works quite well...

You can use a punch and a hammer it does work..

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: RE Joint Tool
« Reply #4 on: January 17, 2009, 01:03:24 AM »
Yeah works fine. Just dont use a 5lb hammer and 260lbs of arm like Dom does....lol

That was a good price on tube btw.
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline BEZZ

  • Budget Lift
  • Posts: 197
Re: RE Joint Tool
« Reply #5 on: January 17, 2009, 02:51:43 PM »
Thanks guys....

 Now I just need to rebuild'em!
Buy some safety glasses.
You can jackoff with a fake hand but you cant see out of a glass eye.