Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Contorl Arms  (Read 1079 times)

0 Members and 1 Guest are viewing this topic.

Offline BEZZ

  • Budget Lift
  • Posts: 197
Contorl Arms
« on: January 11, 2009, 09:10:53 PM »
Custom control arms, homemade or shop made, does anyone run these on a DD?
Logged
Buy some safety glasses.
You can jackoff with a fake hand but you cant see out of a glass eye.

Offline fug

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2345
  • Airdrie Pick n Pull
Re: Contorl Arms
« Reply #1 on: January 11, 2009, 09:55:02 PM »
When my diffs not exploding my Jeep is a DD and I run custom control arms.
Logged
Fug
TJ Rubicon

Offline sylvrinvader

  • That CB Yapper
  • Posts: 606
  • the micro wheeler
Re: Contorl Arms
« Reply #2 on: January 11, 2009, 10:02:41 PM »
i have front upper and lower on my DD
Logged
03 TJ, 33" BFG's,4:88 gears  BBoost, CB, custom front bumper,  insta/extenda trunks, rugged ridge roof rack w/basket

Offline BEZZ

  • Budget Lift
  • Posts: 197
Re: Contorl Arms
« Reply #3 on: January 11, 2009, 10:40:33 PM »
hmmmmm, who made them boys?
Logged
Buy some safety glasses.
You can jackoff with a fake hand but you cant see out of a glass eye.

Offline fug

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2345
  • Airdrie Pick n Pull
Re: Contorl Arms
« Reply #4 on: January 11, 2009, 10:54:00 PM »
Mine are pretty custom... not quite long arm but certainly longer than stock.  Bnine built them.  Johnny Joints and Evo Heims on the arms.  Frame mounts are Poly Performance.  Front axle is stock lower mounts and Currie Johnny Joint upper mounts.  Rear is a custom truss for the uppers and stock lowers.
Logged
Fug
TJ Rubicon

Offline sylvrinvader

  • That CB Yapper
  • Posts: 606
  • the micro wheeler
Re: Contorl Arms
« Reply #5 on: January 12, 2009, 06:59:12 PM »
Quote from: fug on January 11, 2009, 10:54:00 PM
Mine are pretty custom... not quite long arm but certainly longer than stock.  Bnine built them.  Johnny Joints and Evo Heims on the arms.  Frame mounts are Poly Performance.  Front axle is stock lower mounts and Currie Johnny Joint upper mounts.  Rear is a custom truss for the uppers and stock lowers.
same here
Logged
03 TJ, 33" BFG's,4:88 gears  BBoost, CB, custom front bumper,  insta/extenda trunks, rugged ridge roof rack w/basket

Archi-Jp

  • Guest
Re: Contorl Arms
« Reply #6 on: January 19, 2009, 07:33:40 PM »
I made my own based on the Clayton LA kit for the front end- diggin' it...
Logged
Pages: [1]   Go Up
« previous next »