Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: YJ steering ideas  (Read 3030 times)

0 Members and 1 Guest are viewing this topic.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
YJ steering ideas
« on: February 12, 2009, 09:39:00 PM »
just wondering what others have done to tighten up the steering on their YJs. mines fine for what it is, but driving it to work today (just cause)  i realized how sloppy the steering is on it.  its 4.5" lift RE lift springs, and to my knowledge, a dropped pitman arm on it.  bias ply iroks on it too (which i know cause some of the problems)  just seems when driving through town it grabs all the ruts in the road and pulls.
also, it doestn' have the front trac bar on it. i'm just fishing for ideas on how to make the steering on it tighter for street driving!

thanks guys
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline Immortal

  • Talks waaay too much!
  • Posts: 3463
Re: YJ steering ideas
« Reply #1 on: February 12, 2009, 10:05:39 PM »
My tires (33x12.5x15) love to grab any ruts that there are on the road. My wife even commented that the black Jeep wanders alot more than the other Jeeps.
Logged
Quote from: w squared on October 26, 2010, 10:44:27 AM
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: YJ steering ideas
« Reply #2 on: February 13, 2009, 10:49:14 AM »
thats an Xj thing ;)  i was thinkin of some sort of histeer setup, and if anyones done it, info on it etc....
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: YJ steering ideas
« Reply #3 on: February 14, 2009, 05:18:59 PM »
if the thing is grabbing all the ruts then its more a tire thing. if you have the time and place borrow some smaller radial tires, maybe even stock ones and put them on and road test it. if the steering works perfect you know its tires. kinda a pain to do but its a simple way of doing it. ive got a yj with 33" radials, 3" lift with dropped pitman arm. no track bars or sway bars. it drive straight as an arrow. and handles pretty darn good too.
Logged
YJ=Y’all Jealous

slowclimb

  • Guest
Re: YJ steering ideas
« Reply #4 on: February 14, 2009, 07:38:26 PM »
Have you looked at this one.

http://www.rocky-road.com/yjott.html
Logged

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Re: YJ steering ideas
« Reply #5 on: February 16, 2009, 08:11:52 PM »
I noticed once I remove my front trackbar on my YJ that the steering got sloppy, so I purchased a JKS telescoping trackbar for the street

What are the condition of all the joints?
Logged
'95 YJ with a few mods

Offline mike s

  • UberWheeler
  • Posts: 361
  • Good times!
Re: YJ steering ideas
« Reply #6 on: March 09, 2009, 12:15:12 AM »
Good old trick is dial a bit of toe out into it. It'll tend to track truer but it's all a comprormise of lift vs handling. Can't have both, be preparred to start destroying tires.
Logged
'94 YJ, 2.5" RE, 1"BL on 35"s, 8.8 w 4.88
oldEnuff2NObetter

but still can't help myself

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: YJ steering ideas
« Reply #7 on: March 09, 2009, 07:44:41 PM »
Were you at waiporous on saturday JohnnyC? Pretty sure we crossed paths on the way in and YES it did look like you need some steering work!!  :P
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: YJ steering ideas
« Reply #8 on: March 09, 2009, 08:51:14 PM »
lol yup i was there, hills were icy, but thers only one i couldn't get up!  the hills that were just snow were great, the ones with ice on em were a little tougher to get up!
steerings not bad; its just a lifted YJ on big bias ply tires, just want it to handle like my Grand ;)
think in the future i'm gonna go with a hydro assist........
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline AMCJeep

  • Budget Lift
  • Posts: 204
  • Wheel, break, fix, repeat ...
Re: YJ steering ideas
« Reply #9 on: March 09, 2009, 09:51:15 PM »
Don't forget when you lift these leaf sprung vehicles the caster changes and this can cause loose steering and wandering. I Know the spec for a CJ is +6° and mine is about zero. One of these days I'm going to get a 4° steel shim and correct it so the handling goes back close to stock. They can handle good if the specs stay close to stock. Correct caster keeps them going good in a straight line.
Logged
09 JK Wrangler Unlimited Sahara Sunburst Orange
90 YJ AKA Papa Smurf"4.2, AX15, Completely unmolested
03 Ram 2500 QC, LB, 5.9 CTD

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: YJ steering ideas
« Reply #10 on: March 10, 2009, 10:54:13 AM »
Quote from: AMCJeep on March 09, 2009, 09:51:15 PM
Don't forget when you lift these leaf sprung vehicles the caster changes and this can cause loose steering and wandering. I Know the spec for a CJ is +6° and mine is about zero. One of these days I'm going to get a 4° steel shim and correct it so the handling goes back close to stock. They can handle good if the specs stay close to stock. Correct caster keeps them going good in a straight line.

i've never played with castor before Pete, should i bring it in for an alignment? or what am i looking for to do it myself?  i would assume CJ?YJ would be similar....

the hydro won't be for a long while..............
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: YJ steering ideas
« Reply #11 on: March 10, 2009, 11:31:03 AM »
Quote from: JOhnnyC on March 10, 2009, 10:54:13 AM
i've never played with castor before Pete, should i bring it in for an alignment? or what am i looking for to do it myself?  i would assume CJ?YJ would be similar....

the hydro won't be for a long while..............

Johnny what psi are your running? If you lower it it wont grab every rut in the pavement.

The kid at the alignment shop filled mine to 35 and it was hard to keep straight. I usually run 26-28 now. Made  a hell of a difference.
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: YJ steering ideas
« Reply #12 on: March 10, 2009, 11:41:13 AM »
15 psi on the street.  runs ok, just on our good ole' Alberta side roads, she grabs everything
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: YJ steering ideas
« Reply #13 on: March 10, 2009, 11:43:48 AM »
Wow! MPG must just suck! lol thought I may have had it ;)
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: YJ steering ideas
« Reply #14 on: March 10, 2009, 12:25:45 PM »
bias ply iroks. they don't bulge much at all. i was at 8psi this weekend and they looked like 25...... its just a jeep thing or soemting haha
Logged
~ rescue green JKUR on 35s.  typical rubicon build
Pages: [1]   Go Up
« previous next »