Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Winch not work? this is why mine didnt  (Read 1189 times)

0 Members and 1 Guest are viewing this topic.

Offline Marco

  • UberWheeler
  • Posts: 374
Winch not work? this is why mine didnt
« on: March 01, 2011, 08:57:28 AM »
i will be from now on putting a cover on my winch and maybe even pulling the cap off to clean once and a while. warn XD9000i


tossed in the new motor and housing and shes good to go. took about 3-4 uses of it getting weaker and weaker then finnaly quit before i looked inside


possibly i could have cleaned it and put new brushes but parts werent to bad for new stuff-peice of mind
Logged
locked and loaded

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: Winch not work? this is why mine didnt
« Reply #1 on: March 01, 2011, 05:15:53 PM »
How much did the new motor cost?
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: Winch not work? this is why mine didnt
« Reply #2 on: March 01, 2011, 07:16:50 PM »
Hey that looks like mine!



I'm rebuilding an 8274 into a -50 series though. Was like $250 for mine, for $283 I can build my second 8274 into a -60...
Logged

Offline Marco

  • UberWheeler
  • Posts: 374
Re: Winch not work? this is why mine didnt
« Reply #3 on: March 02, 2011, 08:21:10 AM »
i dont even remember it was on my tool bench for a long time before i changed it out. well over 200 im sure, i got it online. easy to change.works awsome now :)
Logged
locked and loaded
Pages: [1]   Go Up
« previous next »