Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: 5.13s for a d30?  (Read 1249 times)

0 Members and 1 Guest are viewing this topic.

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
5.13s for a d30?
« on: June 21, 2011, 06:49:35 PM »
Someone said they had it but ive gone to the end of the internet and back with no luck? Except maybe for a jk?
Logged

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: 5.13s for a d30?
« Reply #1 on: June 21, 2011, 07:05:03 PM »
With a new carrier possible.

But for anyone running that size gears, usually I have seen them with a completely different set of axles under there.


Unless you're talking bout my `54 CJ3B with its 5.38 gearing.  ;D
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: 5.13s for a d30?
« Reply #2 on: June 21, 2011, 07:20:26 PM »
i dont know if those fit in a d30 .. .
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: 5.13s for a d30?
« Reply #3 on: June 21, 2011, 08:12:22 PM »
Quote from: dunl on June 21, 2011, 07:05:03 PM
With a new carrier possible.

But for anyone running that size gears, usually I have seen them with a completely different set of axles under there.


Unless you're talking bout my `54 CJ3B with its 5.38 gearing.  ;D

Was thinking more of a temp solution....

So your saying with a Detroit it would work? Hahah d30 locked on 37s. Hell I'd try it.
Logged

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: 5.13s for a d30?
« Reply #4 on: June 21, 2011, 08:20:02 PM »
i think ull be fine .. if the gears actually fit .. the dana 30 is a dana 44 with a smaller weaker  carrier .so replace the weak carrier and ull be golden
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: 5.13s for a d30?
« Reply #5 on: June 21, 2011, 09:22:09 PM »
Was either an error or they weren't in production long.  Randy's ring and pinion listed them a few years back, not long after I built my diffs.  Now they don't list them and few people remember them being listed.  My guess is error as the jk was being or was newly introduced and it has 5.13 option. 
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon
Pages: [1]   Go Up
« previous next »