Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: What replacement clutch we using now? OEM? aftermarket?  (Read 1178 times)

0 Members and 1 Guest are viewing this topic.

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
What replacement clutch we using now? OEM? aftermarket?
« on: October 16, 2011, 04:23:40 PM »
2005 6 spd behind a 4.0L
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline Rookie

  • CJA Members
  • That CB Yapper
  • Posts: 845
  • build it, break it, rebuild it better
Re: What replacement clutch we using now? OEM? aftermarket?
« Reply #1 on: October 16, 2011, 04:25:48 PM »
I've just been using OEM from napa had good luck so far
Logged
TJ with some stuff

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: What replacement clutch we using now? OEM? aftermarket?
« Reply #2 on: October 16, 2011, 04:32:58 PM »
Quote from: Rookie on October 16, 2011, 04:25:48 PM
I've just been using OEM from napa had good luck so far

Napa actually sells OEM Jeep clutchs?
Dealer quoted me $595 (tax in) for a new clutch & pressure plate, release bearing, pilot bearing, lever, ball and spring.

Vince
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline Rookie

  • CJA Members
  • That CB Yapper
  • Posts: 845
  • build it, break it, rebuild it better
Re: What replacement clutch we using now? OEM? aftermarket?
« Reply #3 on: October 16, 2011, 04:44:49 PM »
Not quite OEM but the aftermarket version of the OEM last one i bought was about 250 for the disk pressure plate release bearing and pilot bearing

Steve
Logged
TJ with some stuff

Offline scott slade

  • UberWheeler
  • Posts: 383
  • Amboy... Route 66
Re: What replacement clutch we using now? OEM? aftermarket?
« Reply #4 on: October 16, 2011, 06:57:05 PM »
Wait a minute...!!!   you saying we have to replace the clutch too....!!!!!  man....    >:(
Logged
2005 LJ, Six Speed,
 16" Moab Rims
HD Broadcast Video Production Unit

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: What replacement clutch we using now? OEM? aftermarket?
« Reply #5 on: October 16, 2011, 06:59:20 PM »

I'd stay away from Centerforce clutches(stage1,2,3) if you go the aftermarket route. Brutal in day to day driving. Your left leg will thank me.

I've logged a ton of km's on LUK brand and Sachs brand clutches in my manual equipped vehicles over the years without any trouble, and the price was reasonable for my Jeeps.
Logged
Lockers
Cuz ya can't kick arse with only one leg

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: What replacement clutch we using now? OEM? aftermarket?
« Reply #6 on: October 16, 2011, 07:52:01 PM »
I think I paid just under $300 from poon source for my clutch kit for the 2.5L.

The 6.0L has a LuK kit ready to go in.
Logged
Pages: [1]   Go Up
« previous next »