Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Custom Fabricating  (Read 3830 times)

0 Members and 4 Guests are viewing this topic.

Offline RookieRecurve

  • Baby Wheeler
  • Posts: 54
Custom Fabricating
« on: June 15, 2012, 01:53:23 PM »
Hey all,

I am looking to get some rock sliders, with steps, custom built.  I looked around on the forum a bit, and did not see any info.  Can  anyone recommend someone in the area that does this type of work?  Specifically someone who understands the needs of off-roaders?

Thanks in advance.
Logged
2006 Dodge Power Wagon 35" tires, 4.56 gears, lockers front and rear, sway bar disconnect, 2.73:1 low range, #12,000 warn winch, 2" factory lift, skid plates, tweaked ECM, beefed up diff covers, bilstein shocks, alcoa forged wheels with bead-keepers, etc

Offline Nootch

  • Baby Wheeler
  • Posts: 61
Re: Custom Fabricating
« Reply #1 on: June 15, 2012, 04:03:10 PM »
Eric Brinker of Brink Fab in Sylvan lake. 

http://www.facebook.com/brink.fab
Logged

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: Custom Fabricating
« Reply #2 on: June 15, 2012, 11:41:20 PM »
Quote from: Nootch on June 15, 2012, 04:03:10 PM
Eric Brinker of Brink Fab in Sylvan lake. 

http://www.facebook.com/brink.fab

What he said. Well worth the trip.
Logged

Offline Nootch

  • Baby Wheeler
  • Posts: 61
Re: Custom Fabricating
« Reply #3 on: June 16, 2012, 12:39:59 AM »
i was on the tipping point about calling him knowing i have enough skill and talent to do about 90% of what i need to do, but i seen the quality and care that he did to your project.  I was sold.  I can't make it look that good, and I don't think I can get it that strong.
Logged

Offline RookieRecurve

  • Baby Wheeler
  • Posts: 54
Re: Custom Fabricating
« Reply #4 on: June 16, 2012, 07:50:41 AM »
Thanks guys.  I sent him a message via Facebook.  I will post some pics of the finished product if I end up getting him to fab it.
Logged
2006 Dodge Power Wagon 35" tires, 4.56 gears, lockers front and rear, sway bar disconnect, 2.73:1 low range, #12,000 warn winch, 2" factory lift, skid plates, tweaked ECM, beefed up diff covers, bilstein shocks, alcoa forged wheels with bead-keepers, etc

Offline KorzaXJ

  • Winch Wench
  • Posts: 33
    • Korza Design
Re: Custom Fabricating
« Reply #5 on: June 18, 2014, 02:34:18 PM »
how did this go? I live fairly close to sylvan so I would love it if I could get some fab done locally
Logged

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Custom Fabricating
« Reply #6 on: June 18, 2014, 10:05:34 PM »
is this for your power wagon? what do you have in mind for rock sliders? something beefy and bolt on
Logged

Offline RookieRecurve

  • Baby Wheeler
  • Posts: 54
Re: Custom Fabricating
« Reply #7 on: June 26, 2014, 07:52:47 AM »
I managed to get some beefy sliders/running boards built from someone in the US.  It seems everyone in Alberta was too busy to entertain this project.  There is a reasonable demand for such a product, so if anyone ever builds a jig, and starts making these, I am sure they could fill a lot of orders!  Mine ended up as bolt-ons, but are mounted lower than I cared for them to be.  It seems the e-brake cable location was an issue.  If you are interested, I could post pics of what I have?

Ian
Logged
2006 Dodge Power Wagon 35" tires, 4.56 gears, lockers front and rear, sway bar disconnect, 2.73:1 low range, #12,000 warn winch, 2" factory lift, skid plates, tweaked ECM, beefed up diff covers, bilstein shocks, alcoa forged wheels with bead-keepers, etc

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Custom Fabricating
« Reply #8 on: June 26, 2014, 08:35:21 AM »
yeah post some pics
Logged
Pages: [1]   Go Up
« previous next »