Author Topic: cherokee 4.0 into tj? (Read 1530 times)

4004ever · « **on:** November 23, 2006, 01:11:11 PM »

any good writeups installing a cherokee 4.0 driveline into a tj?

Shaun

BlackYJ · « **Reply #1 on:** November 23, 2006, 01:41:40 PM »

Are you looking to go from a 4 banger to 4.0L? A little more detail would be good. I have swapped a 94 XJ drivetrain (4.0L) into my 95 YJ (2.5L)

RedYJ · « **Reply #2 on:** November 23, 2006, 03:52:22 PM »

If your dumping your transmission I would be interested. I do know there is a lot of good write ups around, just google search it and you should find some

4004ever · « **Reply #3 on:** November 23, 2006, 04:41:25 PM »

yes, I currently have a 2.5 and want more power. I can get a complete xj for about 1000$

I was wondering how much work it was to put into the tj. I am planning on putting the engine, tranny and tcase from the xj into the tj

shaun

BlackYJ · « **Reply #4 on:** November 23, 2006, 09:02:57 PM »

There are tons of sites around outlining the 2.5 to 4.0 swap. The main thing is that you are going from MPI to MPI so that makes a few things easier. Here is a list of stuff that you will need to do

1. Cut and remove 2.5 motor frame mounts and get new mounts (~$180-200 from dealership)
2. New fan shroud
3. Lengthen front DS
4. Shorten rear DS
5. For the wiring harness the guy that did mine, spline in the 2 extra cylinders because the connection to the fire wall was different

Thats about all that I can think of

Author Topic: cherokee 4.0 into tj? (Read 1530 times)

RedYJ