Author Topic: Need some lift advice for my XJ (Read 2372 times)

dubbleJs · « **Reply #15 on:** December 26, 2006, 03:07:23 PM »

So did you just back the bolt out til it hit the hitch then cut enough off so it wasnt still holding the leaf on?

TheCustomizer · « **Reply #16 on:** December 26, 2006, 04:10:37 PM »

Gimme a buzz Dub, I can help you with that this week if you can make it out to the shop.

cotaman · « **Reply #17 on:** December 26, 2006, 06:34:32 PM »

i just backed it out enough to get the blade in so the threaded end ( with the nut still on ) was supporting the spring, cut it then pulled the remainder out while supporting the spring if still under tension

XJHERO · « **Reply #18 on:** December 27, 2006, 12:48:34 PM »

Check the clearance for the bolt to move up in side when the shackel moves up, i think the bolt only goes in one way starting from the gastank side, nut will be on the outside....................I think...................... :shock:

cotaman · « **Reply #19 on:** December 27, 2006, 12:55:55 PM »

xjhero... remember on my heep.... there wasn't any clearance issues if the bolt was the right length.... so the bolt could go either way... nut in or out

Author Topic: Need some lift advice for my XJ (Read 2372 times)

TheCustomizer