Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Welding  (Read 1094 times)

0 Members and 1 Guest are viewing this topic.

Offline 4PLAYZJ

  • UberWheeler
  • Posts: 423
Welding
« on: April 26, 2007, 08:44:13 PM »
I am in the process of prepping my 8.8 for my project(brackets arrived yesterday)I am wondering if a 110v welder has enough juice to weld my brackets to the diff tubes?.  It is a miller 135.
Logged

mudslinginjoel

  • Guest
Welding
« Reply #1 on: April 26, 2007, 09:37:41 PM »
for something with reverse stresses and what not,I wouldn't use anything smaller then a 230v welder!,we have a few 115v at work,and there pretty much just good for sheet metal.
Logged

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Welding
« Reply #2 on: April 27, 2007, 07:21:28 AM »
I am not up on my welders by if you have to, you could do multiple pass to get the full weld bead.  Plus this actually strengthens the weld.
Logged
'95 YJ with a few mods

Offline JohnB

  • Budget Lift
  • Posts: 248
Welding
« Reply #3 on: April 27, 2007, 10:00:36 AM »
If you know what you are doing, size does not matter  :lol:

If you do not know what you are doing don't do any structural welding, period....
Logged

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Welding
« Reply #4 on: April 27, 2007, 04:21:49 PM »
Some preheat, an practice passes on a test peice will tell you if you can get away with it or not.

It should be enough welder with the proper prep.
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline Gearhead

  • Talks waaay too much!
  • Posts: 1161
Welding
« Reply #5 on: April 27, 2007, 11:00:33 PM »
I've done it with an M135 , it turned out fine  , I'll admit   , my welding career began in 1974.

Given a choice , I'd go with a machine that has more heat though.
Logged

twisted_offroader

  • Guest
Welding
« Reply #6 on: April 28, 2007, 02:39:43 AM »
more heat, dont risk it man
Logged

mudslinginjoel

  • Guest
Welding
« Reply #7 on: April 28, 2007, 07:27:14 AM »
minimun!,a 230 v machine,better safe then sorry right?,I'm a journeyman welder by trade,if your really stuck,tack your brackets on,PM me,and I'll weld it up at my work,you don't want to rip your diff of in the trail man...
Logged

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Welding
« Reply #8 on: April 28, 2007, 08:08:05 AM »
Use a bigger welder.

Had a member of our club weld up some diffs for his XJ with a 110V unit(D44 front and 9" rear). took it down to Moab and some of the bracketry let go on one of the trails. He had to hire a welder with a portable rig to come upto where he was and fix it. And then cause it was a trail fix it wasn't lined up quite right so he had to fix it again when he got home. This was on the front.

2 months later the rear let go on Pretty Rock......

The pattern here is that they'll be fine untill you really push it and then fail at the worst possible time!
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles
Pages: [1]   Go Up
« previous next »