Calgary Jeep Association

Author Topic: Dana 44  (Read 1597 times)

0 Members and 1 Guest are viewing this topic.

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Dana 44
« on: July 21, 2007, 01:03:10 PM »
There is a Dana 44 on an MJ at Pick-N-Pull, complete except for the axle shafts.  About 8 rows in on the south side.

Offline apex

  • Talks waaay too much!
  • Posts: 1190
Dana 44
« Reply #1 on: July 22, 2007, 09:27:31 PM »
f or r?

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Dana 44
« Reply #2 on: July 23, 2007, 08:26:19 AM »
Quote from: "apex"
f or r?


MJs only came with a rear D44
'95 YJ with a few mods

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Dana 44
« Reply #3 on: July 23, 2007, 08:42:03 AM »
It's a 1990 MJ 2WD.

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Dana 44
« Reply #4 on: July 23, 2007, 11:52:06 PM »
someone go in there and play dumb with it. see if they know what axle it is. try to score it cheep;)
YJ=Y’all Jealous

Offline cotaman

  • UberWheeler
  • Posts: 371
Dana 44
« Reply #5 on: July 24, 2007, 03:57:28 AM »
it is a rear axle.... complete they go for 79 + tax i think
98 ZJ, 5" lift, 4.10's, 33" Dick Cepek Mud Country's, 231 swap,  winch/bumper, rock rails, lincoln locker, CB, parked, waiting to pass SK insp
01 WJ, the pavement princess that has been mirror deep in a hole
RIP -- 88 XJ, 3" Skyjacker, 31 MT

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Dana 44
« Reply #6 on: July 24, 2007, 10:09:42 AM »
It's not complete, I already took the shafts as spares.