Calgary Jeep Association

Author Topic: Photo Project - Need your help!  (Read 1175 times)

0 Members and 1 Guest are viewing this topic.

Offline EVOLUTION

  • UberWheeler
  • Posts: 432
    • EMF Rod Ends Website
Photo Project - Need your help!
« on: November 16, 2007, 08:51:01 AM »
Hi everyone!  I am putting together a little photo project and I need your photos!  I need the good, the bad & the ugly from any local wheeling areas in Alberta over the years.

1.  Cleanups

2.  Camping/Wheeling with friends & family

3.  Your favorite truck/bike/quad shots of you or friends on the trails or wildlife pics

4.  destruction, clearcutting, damages done by people on long weekends... any bad pics you have taken from the areas like fire pits, furniture left out there, vehicles burnt etc.

5.  Scenery pics from your favorite past or present AB OHV areas


I'd really appreciate the help and I will try to use as many of the pics in my project as I can.   I am creating a video to raise awareness about our areas.

Thank you for your help!!

You can PM them to me or email me the pics at [email protected]

Erin
Evolution Machining & Fabrication  403.935.3540
Evo Forums:  http://www.evolutionmachining.com
Evo Joints website:  http://www.emfrodends.com
Facebook Page:  http://www.facebook.com/EMFRodEnds

Offline murdajeep

  • Budget Lift
  • Posts: 108
Photo Project - Need your help!
« Reply #1 on: November 16, 2007, 01:41:24 PM »
sent you an email with a few pics I hope they can help a great idea!!!
Murdajeep

91 YJ 4.0L 3.0" Suspension Lift  1.25" Body Lift with Mickey Thompsons MTZ 33's and a champion winch, Ford 8.8, 4.10 Gears

Offline EVOLUTION

  • UberWheeler
  • Posts: 432
    • EMF Rod Ends Website
Photo Project - Need your help!
« Reply #2 on: November 16, 2007, 03:24:21 PM »
Thats great, thank you so much!!
Evolution Machining & Fabrication  403.935.3540
Evo Forums:  http://www.evolutionmachining.com
Evo Joints website:  http://www.emfrodends.com
Facebook Page:  http://www.facebook.com/EMFRodEnds

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Photo Project - Need your help!
« Reply #3 on: November 16, 2007, 08:25:12 PM »
Erin,
i have TONS of pics in every category.

i need to buy some blank DVD discs and i will transfer it and give you copies if you like?
sent from my old school rotary dial phone.

Offline EVOLUTION

  • UberWheeler
  • Posts: 432
    • EMF Rod Ends Website
Photo Project - Need your help!
« Reply #4 on: November 17, 2007, 12:26:01 PM »
Quote from: "Spinalguy"
Erin,
i have TONS of pics in every category.

i need to buy some blank DVD discs and i will transfer it and give you copies if you like?
Sure, that would be great!!  I have a ton of blank DVD's... maybe I can see if Clay is going to see you soon & get him to bring some for you?  Or I could just drop them by your office some next  week.  :)  I would really appreciate those, thanks!
Evolution Machining & Fabrication  403.935.3540
Evo Forums:  http://www.evolutionmachining.com
Evo Joints website:  http://www.emfrodends.com
Facebook Page:  http://www.facebook.com/EMFRodEnds

Offline yyc_tbird_sc

  • Budget Lift
  • Posts: 222
Photo Project - Need your help!
« Reply #5 on: November 17, 2007, 11:14:12 PM »
Few pics sent off to you.... hope you can use them.

Scott
-'97 Ranger w/ 4" lift, 33" MTZ's, 4.56's, and some new sheet metal
-'89 Thunderbird SC - 285HP, 392ft/lbs [email protected]

Offline EVOLUTION

  • UberWheeler
  • Posts: 432
    • EMF Rod Ends Website
Photo Project - Need your help!
« Reply #6 on: November 18, 2007, 11:15:00 AM »
Scott, those are awesome pics, exactly what I was looking for!  Thanks so much...

Thank you to everyone who is sending them in... I still need lots more if you got 'em :)

If you have any of your kids, or family those are very welcome :)
Evolution Machining & Fabrication  403.935.3540
Evo Forums:  http://www.evolutionmachining.com
Evo Joints website:  http://www.emfrodends.com
Facebook Page:  http://www.facebook.com/EMFRodEnds

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Photo Project - Need your help!
« Reply #7 on: November 18, 2007, 11:21:07 AM »
Sent you an album.
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline EVOLUTION

  • UberWheeler
  • Posts: 432
    • EMF Rod Ends Website
Photo Project - Need your help!
« Reply #8 on: November 20, 2007, 08:28:12 PM »
You guys are great... thanks so much!  

I got some great pics from Crispy's place... a little wheeling from the 60's coming right up!  ;)  Gunther, you would like these... I even have a pic of the Four Wheel Stampeders float in the 67 parade ;)

This is going to be a little fun project.  :)
Evolution Machining & Fabrication  403.935.3540
Evo Forums:  http://www.evolutionmachining.com
Evo Joints website:  http://www.emfrodends.com
Facebook Page:  http://www.facebook.com/EMFRodEnds