Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: frontend click/some sort of rumble hehe  (Read 609 times)

0 Members and 1 Guest are viewing this topic.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
frontend click/some sort of rumble hehe
« on: August 23, 2008, 03:18:52 PM »
from the drivers front.  its clicking more and more regularely (like with everywheel rotation) clicks and clunks and i can feel it rotating if that makes anysense (everytime it turns, i can hear it, like, every rotation, damn i'm bad at describing stuff)  but from the click i'm assuming its either hub or CV.  CVs are coming out in place of XJ front shafts but just wondering if i should just redo the hubs as well seeing as i'll have it all apart.   mostly just want to know what that sound is!

thanks
John
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline SmilinVamp

  • Budget Lift
  • Posts: 126
Re: frontend click/some sort of rumble hehe
« Reply #1 on: August 24, 2008, 12:57:32 AM »
My old Chevy did that - it turned out to be the auto locking hubs were worn out... I changed to manual hubs at that point and everything was fine.

Does it chatter in 4 wheel drive or 2 wheel drive or both?
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: frontend click/some sort of rumble hehe
« Reply #2 on: August 24, 2008, 05:58:17 PM »
jeeps AWD so ya it chatters in 4wd.  no 2wd until i swap tcases
Logged
~ rescue green JKUR on 35s.  typical rubicon build
Pages: [1]   Go Up
« previous next »