Calgary Jeep Association
Toggle navigation
Login
Register
×
Welcome,Guest
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Calgary Jeep Association
»
4x4 Related Groups
»
Tech Talk
»
need you to think outside the bun for me
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: need you to think outside the bun for me (Read 1523 times)
0 Members and 1 Guest are viewing this topic.
dogjack
Guest
need you to think outside the bun for me
«
on:
April 01, 2006, 11:55:51 PM »
hey guys and gals need some help here
im going to build my own cargo rack thing for my tj and need a few suggestions. i am going to use a light bracket like this one
http://northridge4x4.com/proddetail.php?prod=KC-7311&PHPSESSID=bc04e6ac747f3a877e9222ddea7d2faf
and mount it like this for the front supports
http://www.4x4xplor.com/images/kargomaster/congocage05.jpg
the two supports im going to make a bracket from the frame up the back and the outside of the lights but need to fab up a hinge like this
http://www.4x4xplor.com/images/kargomaster/congocage06.jpg
so that the whole thing will tilt back so that i can remove the top ect. like this
http://www.4x4xplor.com/images/kargomaster/congocage10.jpg
im good at welding but would rather buy a hinge like this any ideas would be greatly appreciated.
thanks
Logged
Dragonmaster
Guest
need you to think outside the bun for me
«
Reply #1 on:
April 02, 2006, 02:40:15 PM »
go to home depot, rona or canadian tire and take a look at their assortment of heavy duty hinges. You should be able to pick a couple off the shelf and bend and shape them as needed.
Logged
MrDeebs
Guest
need you to think outside the bun for me
«
Reply #2 on:
April 03, 2006, 02:44:15 PM »
I'm looking for a cargo rack just like that. How much for you to build one and would you?
Logged
sgo70
Guest
need you to think outside the bun for me
«
Reply #3 on:
April 09, 2006, 10:02:50 PM »
I was considering building a roof rack as well, those are some great ideas that I was trying to figure out how not to block tail lights or the liscense plate. What about just welding some steel tubing onto some angle iron, then cutting it into three sections?
I would like to see some pictures once you are done. Thanks.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Calgary Jeep Association
»
4x4 Related Groups
»
Tech Talk
»
need you to think outside the bun for me