Calgary Jeep Association

Author Topic: Dick Cepeck Crusher  (Read 5326 times)

0 Members and 2 Guests are viewing this topic.

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: Dick Cepeck Crusher
« Reply #15 on: November 04, 2011, 04:48:43 PM »

Didn't you have an XJ with a SBC 350? It sat in the corner of EVO's old place for a while?
Lockers
Cuz ya can't kick arse with only one leg

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #16 on: November 04, 2011, 04:50:06 PM »
still do... and its still sitting there(looks towards clay) this thing is going to be my winter driver slash transportation to and from tuscany to irricana daily...

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #17 on: November 04, 2011, 04:51:18 PM »
only reasoning bhind the lift is everything needs replacing anywaysd might as well go up at the same time... just want to clear a 31 and have a ittle flex for these lovely ditchs out here

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: Dick Cepeck Crusher
« Reply #18 on: November 05, 2011, 09:33:56 AM »
(looks towards clay)

I guess I shouldn't even ask about Erin's TJ?  ::)

Post some pics of your ZJ in the build section when you have time.
Lockers
Cuz ya can't kick arse with only one leg

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #19 on: November 05, 2011, 02:26:19 PM »
yeah not much to post yet only real thing i have done is the headlight restoration ( whch i must say that and a set of piaa's i can see for 1/2 mile without any issues and light up reflectors for 1 mile..(including deer eyes))..... have the t case and such sitting here just need to get some time where we are making stuff for customers... gonna start on my arms this week....

really cant wait for the steering clays idea is gonna be gold...

and yes dont ask about the tj in fact she probally already saw this and is beating clay lol.....  (hopefully next summer we are gonna try and kick mine erin's and dales out the door....)(to be honest i am glad i waited the stuff he has figured out in those 5 years its worth every second)

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #20 on: November 11, 2011, 01:23:05 PM »
pictures posted in my build up WINTER BEATER.....

missed the howl of a good tire

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: Dick Cepeck Crusher
« Reply #21 on: November 11, 2011, 02:03:50 PM »
I'd be very interested in how the headlight restoration, mine have seen better days.

Offline IgniteTJ

  • Budget Lift
  • Posts: 154
Re: Dick Cepeck Crusher
« Reply #22 on: November 11, 2011, 02:27:11 PM »
Surprising tip for just cleaning them up.. Just use regular toothpaste, put it right on the headlight and scrub it well with a rag.. Rinse off then do it once more. It took the ones on my pickup from probably about 40% to about 70%
1998 Dodge Ram Reg Cab Short Box, lift and 35's going on it over the winter along with 4:10's

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #23 on: November 11, 2011, 02:53:01 PM »
yeah see napa had those 40 dollar 3m kits on sale last month for 20.... so i bought one of those if not a sander and the proper pads will work to.... i will post some pics of the headlights in  my build up....they are 100% including signals(nice and bright again).... ihave nother set as the vechile came with a replacement front for the cracked one... so i have some hazed over lights for comparison.... 

i know i get high beamed all the time for my low beams and there only the piaa extreme whites....and thefunny thing is its all the new vechiles with hids doing it to me....

i have plans for piaas 7led driving lights and some scrap plate and the break at work...

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #24 on: November 25, 2011, 11:21:30 AM »
okay so been driving these for 3 weeks now.. got about 2500 kms on them already... and amn... they stick when u want them to...

i think there between a sticky and regular tire caus eone good spin and your gone... even the other day driving out on the 566 which is rutted to crap the ruts where full of water in the sun ice in the shade and i never felt slippage any time... and i was doing 120 passing people withonly my rear drive shaft in...

i think its alot to do with the driver and knowing what u can and cant do cause  i dotn put myself into stupid situations..

all though i have been doing donuts entering parking lots but mostly on purpose there was a couple ties i gassed it hard to see what it would do and i could gather it back up pretty easy.  overall i give them a 7 so far out of 10

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: Dick Cepeck Crusher
« Reply #25 on: November 25, 2011, 11:32:52 AM »
Did you sipe or groove those crusher tires and do you have a picture of them siped or grooved ?

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #26 on: November 25, 2011, 12:04:43 PM »
not as of yet i think i might if the winter egts any worse

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Dick Cepeck Crusher
« Reply #27 on: November 26, 2011, 03:49:11 PM »
Ya know its gonna get worse ;-)

Offline WK2008

  • UberWheeler
  • Posts: 389
Re: Dick Cepeck Crusher
« Reply #28 on: November 26, 2011, 05:52:01 PM »
okay so been driving these for 3 weeks now.. got about 2500 kms on them already... and amn... they stick when u want them to...

i think there between a sticky and regular tire caus eone good spin and your gone... even the other day driving out on the 566 which is rutted to crap the ruts where full of water in the sun ice in the shade and i never felt slippage any time... and i was doing 120 passing people withonly my rear drive shaft in...

i think its alot to do with the driver and knowing what u can and cant do cause  i dotn put myself into stupid situations..

And you don't think going 120 passing cars on icy roads with any mud tire is a bad idea? Just sayin...

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: Dick Cepeck Crusher
« Reply #29 on: November 26, 2011, 06:41:09 PM »
no if i was doing my usual fish tailing while doing it that might be bad... see i think doing a donut while entering a parking lot is perfectly normal