Calgary Jeep Association

Author Topic: CB Radio Question  (Read 945 times)

0 Members and 1 Guest are viewing this topic.

Offline MOABICON

  • Budget Lift
  • Posts: 199
  • MOABICON
CB Radio Question
« on: May 09, 2012, 10:26:55 PM »
Does the CB unit itself have to be grounded. :-X
03 TJ, 4" lift, 33's, Eaton eLockers- Front & Rear, winch, CB

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: CB Radio Question
« Reply #1 on: May 10, 2012, 02:16:37 AM »
yes.  there is a power + and a power - that should be attached to the battery.

there is a good chance the cb might work without the power - attached because it can steal ground from the antenna.
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline Ddub1973

  • Budget Lift
  • Posts: 112
Re: CB Radio Question
« Reply #2 on: May 10, 2012, 07:23:39 AM »
I ran my power + directly to the post on the fuse box and grounded my power - to a ground under the dash just last night.  Going to your batter can pick up interfearance if you have other things running to the battery also.

http://forum.calgaryjeep.com/index.php?topic=25453.msg159934#msg159934
DDUB OIIIIO

2013 JKUR

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: CB Radio Question
« Reply #3 on: May 10, 2012, 01:44:55 PM »
I ran both wires directly to the battery and used inline fuses in both positive and negative.

Vince
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306

 Resident prick is my job and it took me ten years to earn that title

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: CB Radio Question
« Reply #4 on: May 10, 2012, 08:06:03 PM »
Battery is grounded to frame so you can ground the CB unit itself to anywhere on the frame.