Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: morerpmfred on April 10, 2011, 05:27:12 PM

Title: where to get spring perches
Post by: morerpmfred on April 10, 2011, 05:27:12 PM

For an xj. Crawling underneath today , looking for some mystery noises i found some rear spring perches that have gone flatter and rounded in all the wrong places. Do not know what happenned , has never been down a couple thousand miles of ugly washboard road at excessive speed  ;D  Or offroad  ;D Where do you get new spring perches ?

Title: Re: where to get spring perches
Post by: Rookie on April 10, 2011, 09:46:38 PM

Standens will have them sitting on the shelf and way cheaper than everywhere else last time i had to get some

Title: Re: where to get spring perches
Post by: stroker sahara on April 10, 2011, 10:40:55 PM

I have some that I make CNC plasma and CNC brake. They are 7 " long for anti-wrap and have three holes for mounting axle center or forward/back 1".

$25/pr

Available for 2.75, 3.0, and 3.25" axle tubes

Title: Re: where to get spring perches
Post by: Bnine on April 11, 2011, 07:47:08 AM

Quote from: stroker sahara on April 10, 2011, 10:40:55 PM

I have some that I make CNC plasma and CNC brake. They are 7 " long for anti-wrap and have three holes for mounting axle center or forward/back 1".

$25/pr

Available for 2.75, 3.0, and 3.25" axle tubes

Those would be the way to go.

Title: Re: where to get spring perches
Post by: XJHERO on April 11, 2011, 08:20:25 AM

Quote from: stroker sahara on April 10, 2011, 10:40:55 PM

I have some that I make CNC plasma and CNC brake. They are 7 " long for anti-wrap and have three holes for mounting axle center or forward/back 1".

$25/pr

Available for 2.75, 3.0, and 3.25" axle tubes

wish i knew about these before the last  3 shity pairs i got from standens

Title: Re: where to get spring perches
Post by: rangerdanger on April 11, 2011, 09:34:31 AM

I run the ones that stroker sahara makes and they are good quality, heavy duty stuff. Plus the ability to adjust your wheelbase slightly is nice.  :)

Title: Re: where to get spring perches
Post by: morerpmfred on April 11, 2011, 10:07:29 AM

I would like to get a set of these from stroker sahara. I have a Dana 35 so I think I need the 2.75 size. My cell number is 470 2942 Andy.

Title: Re: where to get spring perches
Post by: morerpmfred on April 16, 2011, 05:08:19 PM

Thank you Scott for the spring perchs. They are clean and very stout , a very good buy.