Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: el duke on December 28, 2011, 04:11:50 PM

Title: re;jeeptj2003
Post by: el duke on December 28, 2011, 04:11:50 PM

 Well i bench tested the starter,it works fine
AAm not getting any power from the ignition,
to the starter,relays are ok and fuses are ok
any suggestions?

Title: Re: re;jeeptj2003
Post by: apeman on December 28, 2011, 04:19:15 PM

Check your grounds as a start.

Title: Re: re;jeeptj2003
Post by: JackstandJohnny on December 28, 2011, 09:27:26 PM

neutral safety switch?

Title: Re: re;jeeptj2003
Post by: el duke on December 29, 2011, 01:01:04 PM

 I will check the grounds today.
This is a standar trans. so i dont think the neutral switch applies,
but thanks.
What about a clutch relay?
The last time this happened i had to replace sterring column assembly cause actuator switch was broken 1200 bucks

Title: Re: re;jeeptj2003
Post by: Darkcalling on December 29, 2011, 01:28:19 PM

Neutral safety switch clutch relay same beast really but check it first they go out on occasion.

Title: Re: re;jeeptj2003
Post by: binare on December 29, 2011, 04:45:42 PM

Quote from: el duke on December 29, 2011, 01:01:04 PM

I will check the grounds today.
This is a standar trans. so i dont think the neutral switch applies,
but thanks.
What about a clutch relay?
The last time this happened i had to replace sterring column assembly cause actuator switch was broken 1200 bucks

or you could buy the actuator switch at napa for 40 bucks.

Title: Re: re;jeeptj2003
Post by: Rubi03 jef on December 29, 2011, 06:36:43 PM

come on   just install a push button start .                       ;D ;D ;D

Title: Re: re;jeeptj2003
Post by: el duke on December 30, 2011, 01:08:06 PM

 Ya i have not looked at the ignitionn yet.
Am just working on that push button start rt. now

Title: Re: re;jeeptj2003
Post by: el duke on January 02, 2012, 06:09:17 PM

 Tried the push button start,it worked once!!!!!!!!!
Thought i had her licked.Did not work a gain.
Something must be broken in the ignition,i even moved the
20amp fuse in glove box to no avail.
Anyone else have this problem?
BEATS ME?

Title: Re: re;jeeptj2003
Post by: el duke on January 06, 2012, 06:55:47 PM

 Finally got the jeep in the garage.
Pulled apart the ignition,and it was a broken,
ignition actuator pin.Here we go again! Part not sold seperately,
pick a part, i guess ,FRICKIN POT METAL PIECE,what challenged
idiot came up with this schematics for this

Title: Re: re;jeeptj2003
Post by: binare on January 08, 2012, 04:43:13 PM

Why dont you just buy a new one instead of wasting your time like this?

Title: Re: re;jeeptj2003
Post by: el duke on January 11, 2012, 03:43:34 PM

 Ya after all that it was the
actuator.AA piece fell off a fter disassembling
steering column,i knew that was the problem.
Thanks for all the input.
I just was not sure  ;D