Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: TF 727 install  (Read 730 times)

0 Members and 1 Guest are viewing this topic.

Offline Eagle Jeeper

  • Budget Lift
  • Posts: 286
TF 727 install
« on: April 08, 2009, 12:12:03 PM »
I just finished installing my auto tranny and I am just wondering what the correct procedure for filling with fluid is because I know you shouldn't check the fluid unless running hot in neutral.

Thanks
Logged
94 YJj7, AMC360,T176,Dana300(twin stick, Dana 44 4:56, 14 bolt FF welded 4:56, 2 1/2" susp SOA, 38/12.5/15 TSL's, warn 8274,  Custom dash

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: TF 727 install
« Reply #1 on: April 08, 2009, 10:05:42 PM »
chryslers all seem to be running in neutral hot. once at that point go for a drive and shift throug hall gears and then re-check.
Logged
YJ=Y’all Jealous

Offline Eagle Jeeper

  • Budget Lift
  • Posts: 286
Re: TF 727 install
« Reply #2 on: April 15, 2009, 05:34:21 PM »
OK but before that when the tranny is dry how much fluid do you put in to start.  Then do you start the motor and let it warm up. Then check and add accordingly how much fluid does an auto tranny usually take.  Sorry I'm new to the auto world.
Logged
94 YJj7, AMC360,T176,Dana300(twin stick, Dana 44 4:56, 14 bolt FF welded 4:56, 2 1/2" susp SOA, 38/12.5/15 TSL's, warn 8274,  Custom dash

Offline 2grand4u

  • UberWheeler
  • Posts: 480
Re: TF 727 install
« Reply #3 on: April 15, 2009, 05:41:06 PM »
Quote from: Eagle Jeeper on April 15, 2009, 05:34:21 PM
OK but before that when the tranny is dry how much fluid do you put in to start.  Then do you start the motor and let it warm up. Then check and add accordingly how much fluid does an auto tranny usually take.  Sorry I'm new to the auto world.

when i put my 42re in my grand it took 8 things of atf i just pored it in then checked without running, made sure it was close then started and added tell it was perfect.

i'm not sure if it helps but that is what i know
Logged
2011 ford ranger going to get some love soon

Offline Eagle Jeeper

  • Budget Lift
  • Posts: 286
Re: TF 727 install
« Reply #4 on: April 15, 2009, 06:04:59 PM »
Makes sense if you fill it to full the fluid should go down because you still need to fill up the converter and cooler.
Logged
94 YJj7, AMC360,T176,Dana300(twin stick, Dana 44 4:56, 14 bolt FF welded 4:56, 2 1/2" susp SOA, 38/12.5/15 TSL's, warn 8274,  Custom dash
Pages: [1]   Go Up
« previous next »