Calgary Jeep Association

Author Topic: Lifting the hood for cooling  (Read 2153 times)

0 Members and 1 Guest are viewing this topic.

Offline Waytec

  • Talks waaay too much!
  • Posts: 1972
  • not all there
Lifting the hood for cooling
« on: April 07, 2010, 11:38:16 AM »
So the summer is coming and I need to do something about the 4.0 in my XJ getting hot.

I was thinking about cutting and putting Run Cool vents in, but I have seen guys putting spacers on the hood hinges and lifting it. How well does this work? And how thick of spacers are you using?

I am liking this idea because I can lower it back down for the winter.
Why does your Jeep say Toyota on it?
The obstacle is the path.

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Re: Lifting the hood for cooling
« Reply #1 on: April 07, 2010, 12:25:20 PM »
Just get one of these instead, http://www.extremeradiator.com/store/ProductDetail.aspx?sku=1193-3 and no more cooling problems
'95 YJ with a few mods

Offline Waytec

  • Talks waaay too much!
  • Posts: 1972
  • not all there
Re: Lifting the hood for cooling
« Reply #2 on: April 07, 2010, 12:42:44 PM »
I have actually never had a overheating issue.
Just in the summer the hood and panels get so hot you cannot touch them. Once you open the hood you can feel the heat trapped in the engine compartment and it is a little excusive.
Why does your Jeep say Toyota on it?
The obstacle is the path.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Lifting the hood for cooling
« Reply #3 on: April 07, 2010, 12:46:20 PM »
sounds like you need some fancy hood louvres.

couple snips and your good to go
~ rescue green JKUR on 35s.  typical rubicon build

Offline The Machinist

  • CJA Members
  • That CB Yapper
  • Posts: 741
  • I’m with stupid!
Re: Lifting the hood for cooling
« Reply #4 on: April 07, 2010, 01:13:33 PM »
I'm gonna try some purple ice this summer.
I just can’t resist a good mud hole!  🤦

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Lifting the hood for cooling
« Reply #5 on: April 07, 2010, 02:25:48 PM »
Put shutters on the louvres/vents like on the forced-air heat ducts in a house...

Ghetto Fab!

Offline yyc_tbird_sc

  • Budget Lift
  • Posts: 222
Re: Lifting the hood for cooling
« Reply #6 on: April 07, 2010, 02:32:37 PM »
Speed Holes!! LOL
-'97 Ranger w/ 4" lift, 33" MTZ's, 4.56's, and some new sheet metal
-'89 Thunderbird SC - 285HP, 392ft/lbs [email protected]

1988 Cherokee

  • Guest
Re: Lifting the hood for cooling
« Reply #7 on: April 07, 2010, 02:59:49 PM »
Mine was overheating today because of idling.
Overheated a little towing the trailer back to Calgary a month ago.
Just going to put in a better thermostat and replace the fluids and see what happens.
If it still is overheating I will just cut the hood open.
Then get a cored truck radiator from the junk yard.
 

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: Lifting the hood for cooling
« Reply #8 on: April 07, 2010, 03:24:58 PM »
http://greatlakesxj.activeboard.com/index.spark?forumID=43793&p=3&topicID=6594654

or vents

http://www.comancheclub.com/forums/viewtopic.php?f=2&t=7131

or

Buy a spare hood from one of the several Cherokees floating around or being parted out.  Cut out a cowl, and weld it to the main hood.  You can make it as wide as you like.  No need for vents, and no issues with rain or water coming through.
« Last Edit: April 07, 2010, 04:02:10 PM by dunl »
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: Lifting the hood for cooling
« Reply #9 on: April 07, 2010, 04:14:03 PM »
it's the square headlights.  not very aerodynamic.  cut squares in big enough to use as windows like that bolivian video you posted
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: Lifting the hood for cooling
« Reply #10 on: April 07, 2010, 05:21:26 PM »
I've heard of XJ guys removing the weather seal from the trailing edge of the hood to allow the hot air to escape.
One minute job and reversible if you don't like it.

Vince
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306

 Resident prick is my job and it took me ten years to earn that title

Offline jpthing

  • UberWheeler
  • Posts: 389
  • I like things with wheels.
Re: Lifting the hood for cooling
« Reply #11 on: April 14, 2010, 09:16:51 PM »
I have foundf that even removing the hood entirely didn't make a big difference.

"water wetter" and a new fan did though!
'97 TJ, 5" lift, 35's "Sprout"
'95 Xj, 4" lift, 33's Sold to the Bagman
'10 JK unlimited

"Whether you think you can or think you can't...you're right."
-Henry Ford

I'm finally over the Jeep bike debacle..

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Lifting the hood for cooling
« Reply #12 on: April 14, 2010, 10:11:05 PM »
When I was in Moab I ran with out the hood and it definatly made a difference. Tried water wetter twice, both times on tow rigs. and never saw a difference.
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles