Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Machine shop recommendations  (Read 1475 times)

0 Members and 1 Guest are viewing this topic.

Offline Grease Nipple

  • Budget Lift
  • Posts: 132
Machine shop recommendations
« on: June 07, 2010, 09:17:29 PM »
Almost have the heads off the dodge, Can anyone recommend a good, but fairly inexpensive machine shop to have the heads tested for cracks and warpage? maybe even have them cleaned up a bit?

how much would this typically run? I'm on a tight budget.

Thanks in advance!!

Ian
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Machine shop recommendations
« Reply #1 on: June 07, 2010, 10:36:16 PM »
i know a guy........................
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline stroker sahara

  • UberWheeler
  • Posts: 361
Re: Machine shop recommendations
« Reply #2 on: June 07, 2010, 10:39:44 PM »
You may want to check with Cetus Automotive as their machine shop was blowing old inventory out the door cheap. I believe they wer $50 per head and I think they are rebuilt. They may have Dodge heads still.
Logged
If you want to run with the big dogs you have to be able to pee in the tall grass.


1989 YJ SOA, 36" SX, 4.6 Stroker...

Offline Grease Nipple

  • Budget Lift
  • Posts: 132
Re: Machine shop recommendations
« Reply #3 on: June 08, 2010, 07:48:00 AM »
I talked to them. They didn't have any 360 heads left.
Logged

Offline fug

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2345
  • Airdrie Pick n Pull
Re: Machine shop recommendations
« Reply #4 on: June 08, 2010, 07:56:50 AM »
Eeek not Cetus... have not heard good things about them

Try Precise ... they are supposed to be decent
Logged
Fug
TJ Rubicon

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Machine shop recommendations
« Reply #5 on: June 08, 2010, 09:42:17 AM »
PM on here The Machinist.

He owns his own shop doing head work and has done a couple jobs for me(a Cummins diesel and a subaru). Good work, good price.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline Grease Nipple

  • Budget Lift
  • Posts: 132
Re: Machine shop recommendations
« Reply #6 on: June 09, 2010, 09:49:59 PM »
Just got back from Jamie's AKA The Machinist...

Great guy!!

Thanks Jamie!

unfortunately the heads are toast and I need to find a engine now :(
Logged
Pages: [1]   Go Up
« previous next »