Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: aftermarket Frame nutserts  (Read 1178 times)

0 Members and 3 Guests are viewing this topic.

Offline Marco

  • UberWheeler
  • Posts: 374
aftermarket Frame nutserts
« on: January 22, 2013, 08:12:45 AM »
I need 3 nutserts and 3 bolts for my TJ skidplate. dealer wants $120! anyone know of a different source? thanks in advance
Logged
locked and loaded

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: aftermarket Frame nutserts
« Reply #1 on: January 22, 2013, 11:41:02 AM »
Calgary Fastener?
Bolt Supply?
Quest?
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline Redsonja

  • Baby Wheeler
  • Posts: 54
Re: aftermarket Frame nutserts
« Reply #2 on: January 22, 2013, 12:21:46 PM »
Ya fasteners sells both the tool and the nuts.


Sent from my atari using Tapatalk
Logged

Offline RACKMAN

  • That CB Yapper
  • Posts: 516
Re: aftermarket Frame nutserts
« Reply #3 on: January 24, 2013, 11:40:04 PM »
Quote from: Marco on January 22, 2013, 08:12:45 AM
I need 3 nutserts and 3 bolts for my TJ skidplate. dealer wants $120! anyone know of a different source? thanks in advance
What dealer did you go to and do you have a part number? I went to Courtesy Chrysler looking for this exact thing and the parts guy said there was no listing whatsoever for those nutserts...I only need one so I may be willing to pay. Thanks
Logged
2005 Jeep LJ Rubicon. 2012 Ram 2500 Cummins 4X4 Crewcab.

Offline Marco

  • UberWheeler
  • Posts: 374
Re: aftermarket Frame nutserts
« Reply #4 on: January 25, 2013, 01:37:52 PM »
Awsome thanks! What tool? Don't they just tack weld to the underside of frame rail? At least the ones I ground off did
Logged
locked and loaded

Offline RACKMAN

  • That CB Yapper
  • Posts: 516
Re: aftermarket Frame nutserts
« Reply #5 on: January 25, 2013, 03:24:10 PM »
Can you tell me what dealer you went to? Thanks.
Logged
2005 Jeep LJ Rubicon. 2012 Ram 2500 Cummins 4X4 Crewcab.

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: aftermarket Frame nutserts
« Reply #6 on: January 25, 2013, 03:53:54 PM »
Quote from: RACKMAN on January 24, 2013, 11:40:04 PM
do you have a part number?

It's a bit confusing in the Mopar parts listing but try Mopar part numbers 06507904AA or 06506629AA for the bolts and rivnets.
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline Marco

  • UberWheeler
  • Posts: 374
Re: aftermarket Frame nutserts
« Reply #7 on: January 25, 2013, 08:45:09 PM »
i also have two part numbers from mopar, of which their exploded views dont actually show the numbers of the nuts and bolts. it was # 19 or so. but either way i spent some time with a knowledgable parts guy there and its still $21 per nut and $15 per bolt. i concluded those prices as nothing short of halarious (but not suprised) and decided to look for another source. this is a common issue with every yj cj tj skid plate and instead of welding washers and nuts to invent threaded holes i would like a quick solution after the originals are popped out. i shall check calgary fasteners tomorow! thanks for any input.
Logged
locked and loaded

Offline LLYJ

  • UberWheeler
  • Posts: 350
  • carport ghetto fab
Re: aftermarket Frame nutserts
« Reply #8 on: January 25, 2013, 08:45:41 PM »
I bought a couple at Renfrew - they knew exactly what I was talking about
Logged
51 Willys CJ3A - V6, SM420, T18, D44/27 lockers
93 YJ, starting to see light at the end of the carport
98 ZJ, 5.2l - DD with too many go go gadgets
05 Dodge 2500HD hauler
Pages: [1]   Go Up
« previous next »