Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: May be a silly question,... Aftermarket hella driving lights.  (Read 1079 times)

0 Members and 1 Guest are viewing this topic.

Offline JENSSEN

  • Talks waaay too much!
  • Posts: 1606
    • Racing For The Cure
May be a silly question,... Aftermarket hella driving lights.
« on: February 11, 2014, 07:48:58 PM »
I got a set of hella 500 black magic driving lights .



The OEM driving lights are shot, can I wire these to the factory harness or just use the factory harness as a signal for the included relay and harness that came with the Hella system? Don't want a meltdown or factory harness fire.
Logged
www.racingforthecure.ca


Definition of Link to this definition of Blasphemy
1. [n] blasphemous behavior; the act of depriving something of its sacred character;

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: May be a silly question,... Aftermarket hella driving lights.
« Reply #1 on: February 11, 2014, 07:54:53 PM »
I would go with option two.
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: May be a silly question,... Aftermarket hella driving lights.
« Reply #2 on: February 11, 2014, 07:56:11 PM »
Option drastically reduces the chances of a fire...and if you use an appropriate gauge of wire, the lights will be far brighter as well. Factory harnesses for lights tend to suck in a pretty epic way.
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline mike s

  • UberWheeler
  • Posts: 361
  • Good times!
Re: May be a silly question,... Aftermarket hella driving lights.
« Reply #3 on: February 12, 2014, 08:23:43 AM »
use supplied relay, if you want them even brighter wire the power feed to relay (with a fuse) to your alternator main lug. extra half volt or so. use the factory wiring to trigger the relay.
Logged
'94 YJ, 2.5" RE, 1"BL on 35"s, 8.8 w 4.88
oldEnuff2NObetter

but still can't help myself
Pages: [1]   Go Up
« previous next »