Calgary Jeep Association

« previous next »
Pages: 1 [2]   Go Down

Author Topic: Winch recommendations...?  (Read 3439 times)

0 Members and 1 Guest are viewing this topic.

Offline slanktapper

  • UberWheeler
  • Posts: 477
  • Rob
Re: Winch recommendations...?
« Reply #15 on: March 08, 2018, 01:14:19 PM »
If i buy a warn winch, but I have a smittybilt winch plate do I need a new one of those too?
Logged
Tall Rob

Sold: Silver 06 Rubicon - 35"
Current: 92hp True selectable 4x4, Spooled rear diff, Electric front locker, 30" Mud Tires, Snorkel. Warn Axon 35s.

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: Winch recommendations...?
« Reply #16 on: March 08, 2018, 04:46:52 PM »
Quote from: slanktapper on March 08, 2018, 01:14:19 PM
If i buy a warn winch, but I have a smittybilt winch plate do I need a new one of those too?

Mounting plate??.......Drill mounting holes, weld old holes closed, etc.
Logged

Offline MattMan

  • Administrator
  • That CB Yapper
  • Posts: 704
  • old age & treachery wins over youth & vigour
Re: Winch recommendations...?
« Reply #17 on: March 08, 2018, 07:02:59 PM »
4.5”x10” seems to be a fairly common/popular mounting spec. Even matches my old CPE POS.
 As far as I can tell it should be the same as your XRC... of course it depends on which Warn winch you’re considering. They don’t all mount the same.
« Last Edit: March 08, 2018, 07:23:53 PM by MattMan »
Logged
MattMan

'21 JL Rubi, 3.6l 8spd, Warn VR10, 2.5" lift, Tazered w/35’s

Offline slanktapper

  • UberWheeler
  • Posts: 477
  • Rob
Re: Winch recommendations...?
« Reply #18 on: March 12, 2018, 10:23:15 AM »
Ah perfect thanks guys!

> Mounting plate??.......Drill mounting holes, weld old holes closed, etc.

I should have been able to figure that out...
Logged
Tall Rob

Sold: Silver 06 Rubicon - 35"
Current: 92hp True selectable 4x4, Spooled rear diff, Electric front locker, 30" Mud Tires, Snorkel. Warn Axon 35s.

Offline Josh54

  • Stocker
  • Posts: 17
Re: Winch recommendations...?
« Reply #19 on: March 12, 2018, 09:02:07 PM »
Quote from: FiEND on March 07, 2018, 01:06:33 AM
VR10 is $724 at northridge - same one i bought 6 months ago for $803 - seems pretty good for the couple times i used it.

https://www.northridge4x4.ca/part/jeep-truck-suv-winches/96810-warn-vr10

That's one nice deal.
Logged

Offline BrokenAxle

  • That CB Yapper
  • Posts: 740
    • Broken Axle home page
Re: Winch recommendations...?
« Reply #20 on: March 14, 2018, 07:58:31 AM »
Matt!  Next time give me a call and I'm sure I could at least match that price, if not beat it.

See if I ever loan you my tire chains again!
Pffft!
Logged

Offline MattMan

  • Administrator
  • That CB Yapper
  • Posts: 704
  • old age & treachery wins over youth & vigour
Re: Winch recommendations...?
« Reply #21 on: March 15, 2018, 06:46:11 AM »
Sorry Dave!
Total brain-lapse on my part. 😞

BA is on my list of vendors going forward... as it should be!
Logged
MattMan

'21 JL Rubi, 3.6l 8spd, Warn VR10, 2.5" lift, Tazered w/35’s
Pages: 1 [2]   Go Up
« previous next »