Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Cherokee track bar bolts?  (Read 3043 times)

0 Members and 1 Guest are viewing this topic.

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Cherokee track bar bolts?
« on: February 04, 2009, 02:19:18 PM »
what size are the bolts for the trackbar on a 1990 cherokee?
Logged
1984 Chevy 6" Lift 40" Boggers

Offline S-FLY

  • Budget Lift
  • Posts: 203
  • '94 XJ
Re: Cherokee track bar bolts?
« Reply #1 on: February 04, 2009, 03:27:54 PM »
I just had mine apart on the weekend.  I think they're a 14mm head, not sure if that helps you or not.
Logged
ve1sly

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Re: Cherokee track bar bolts?
« Reply #2 on: February 04, 2009, 03:30:34 PM »
yup thats all i need to know.. just dont wanna carry a buncha sockets to pick n pull haha
Logged
1984 Chevy 6" Lift 40" Boggers

Offline S-FLY

  • Budget Lift
  • Posts: 203
  • '94 XJ
Re: Cherokee track bar bolts?
« Reply #3 on: February 04, 2009, 04:00:34 PM »
Take a 15mm with you too, I can't be 100% sure which size it was.  Although my gut tells me 14mm.  The nut on the back side, if it wasn't replaced should be welded to a tab that will prevent it from moving in which case you won't need to put a wrench on that end.
Logged
ve1sly

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Cherokee track bar bolts?
« Reply #4 on: February 04, 2009, 09:56:52 PM »
15mm. get the tab/nut too. its a bitch to do without it.  might need a breaker bar too dude
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Re: Cherokee track bar bolts?
« Reply #5 on: February 04, 2009, 10:00:24 PM »
i got the breaker bar and such covered  ;D
Logged
1984 Chevy 6" Lift 40" Boggers

Offline S-FLY

  • Budget Lift
  • Posts: 203
  • '94 XJ
Re: Cherokee track bar bolts?
« Reply #6 on: February 04, 2009, 10:16:46 PM »
Any luck grabbing a bar from pick n pull?
Logged
ve1sly

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: Cherokee track bar bolts?
« Reply #7 on: February 05, 2009, 10:51:42 AM »
It is definitely a 15mm.  Use a wrench and a hammer or a long breaker bar.  For a 1990 the nut may break out of the tap and have to be tack welded back in if you manage to get the bolt out.
Logged

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Re: Cherokee track bar bolts?
« Reply #8 on: February 05, 2009, 10:55:52 AM »
how big of a pain is the castle nut on the oposing end?
Logged
1984 Chevy 6" Lift 40" Boggers

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: Cherokee track bar bolts?
« Reply #9 on: February 05, 2009, 12:02:51 PM »
Quote from: Mudhawg on February 05, 2009, 10:55:52 AM
how big of a pain is the castle nut on the oposing end?
just do it!
Logged
Like ivry soap....pure as frack
DD
Get at me Wolf

Offline S-FLY

  • Budget Lift
  • Posts: 203
  • '94 XJ
Re: Cherokee track bar bolts?
« Reply #10 on: February 05, 2009, 01:12:04 PM »
As long as the nut is still welded to the tab, it shouldn't be an issue.  Worst case, bring a recip saw (if you have one or can borrow one) with you and cut the bolt between the back of the track bar and the bracket.
Logged
ve1sly

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Cherokee track bar bolts?
« Reply #11 on: February 05, 2009, 04:59:53 PM »
Quote from: Mudhawg on February 05, 2009, 10:55:52 AM
how big of a pain is the castle nut on the oposing end?

It can be a big pain. If you cann't get it out just un bolt the bracker from the frame. Also on earlier year XJs the lower bolt was torx head. Most of the lower bolts were lock-tited in from the factory and can be near impossible to get out without heat. However last time I was a PUP they didn't let in propane torches.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Re: Cherokee track bar bolts?
« Reply #12 on: February 05, 2009, 07:16:07 PM »
took the entire bracket/trackbar and score a pretty much brand new 3" rancho lift off it too  ;D
Logged
1984 Chevy 6" Lift 40" Boggers

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: Cherokee track bar bolts?
« Reply #13 on: February 09, 2009, 02:23:24 PM »
Punch that bolt out to a 7/16's and weld a washer on the outer portion of the bracket doug. Getting a nut in there isnt to bad.

Use a paper towel and press the nut into the wrench to hold it.

Ditch the stocker right away and safe yourself some greif down the road.

And a new bushing for that trackbar is a MOOG K3176. The autovalue on barlow keeps them in stock for me.
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]
Pages: [1]   Go Up
« previous next »