Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: 4 lo is a no go  (Read 852 times)

0 Members and 1 Guest are viewing this topic.

YoungFluff03TJ

  • Guest
4 lo is a no go
« on: August 25, 2009, 05:24:35 PM »
So i put on my 3" lift for my TJ with a T-case Drop, all is fine. I had clearance issues with my shifter going into the lower gear (2,4,R) so i took the boot off and its perfect. But...4 low wont go into 4 lo. 2, 4 Hi Neutral are all fine....do I just need to shave the plastic back a bit same as the shifter? or is something more drastic neccesary?
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: 4 lo is a no go
« Reply #1 on: August 25, 2009, 08:59:05 PM »
i think you solved your own problem.............
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: 4 lo is a no go
« Reply #2 on: August 26, 2009, 09:46:01 AM »
No, you just need to adjust the rod to correct the placement of the shifter throw.

Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

YoungFluff03TJ

  • Guest
Re: 4 lo is a no go
« Reply #3 on: August 26, 2009, 11:27:15 AM »
i just like to consult experts before i hack  the inside of my child
Logged

Offline LifesGrand

  • UberWheeler
  • Posts: 364
Re: 4 lo is a no go
« Reply #4 on: August 26, 2009, 03:57:24 PM »
Quote from: YoungFluff03TJ on August 26, 2009, 11:27:15 AM
i just like to consult experts before i hack  the inside of my child

I think what Bnine is explaining to you is do not cut any plastic, crawl underneath the jeep, find the linkage adjust screw & muck wit it.
« Last Edit: August 26, 2009, 04:00:06 PM by LifesGrand »
Logged
95 ZJ v8 Ltd.

I called the number on the T.V. set & turned my gold in for cash....
Pages: [1]   Go Up
« previous next »