Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Heater issue  (Read 1305 times)

0 Members and 1 Guest are viewing this topic.

Offline DewaldJ

  • Stocker
  • Posts: 19
Heater issue
« on: December 23, 2013, 09:56:47 PM »
I have a 1997 TJ . The fan/heater inside only works when I turn the knob to 4. Nothing happens on 1,2,3. Any ideas?

Devo
Logged

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Heater issue
« Reply #1 on: December 23, 2013, 10:33:17 PM »
Heater blower fan resistor pack. Sorry no idea where it is on a TJ. Usually under the dash on the passenger side, bolted into the heater box, has a wiring harness going to it with 3-4 wires and then may go off to the blower motor.

Be advised that when the resistor pack goes its often a sign that the blower motor is going. Especially if any wires are burnt or the plug shows signs of melting.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline DGenR8

  • Budget Lift
  • Posts: 235
Re: Heater issue
« Reply #2 on: December 29, 2013, 03:06:23 AM »
Refer to this post on The Wrangler forum, has pics and everything  8)
http://www.wranglerforum.com/f282/heater-blower-motor-resistor-replacement-with-pics-133063.html
Logged
_/l ,['''`'''],
l---L--OllllllO-
()_)-()_)-o-)_)

81 CJ7

Offline GreenMachine

  • Budget Lift
  • Posts: 281
Re: Heater issue
« Reply #3 on: January 01, 2014, 08:12:58 PM »
I'm y 03 tj,

Took out the glove box, and it was kinda awkward, between the bottom of the opening and the bottom edge,
Logged
03 Tj Lifted 2.5" - Light Bar - 31's - Rock Sliders - Full Edge Jammer Trail Kit
Pages: [1]   Go Up
« previous next »