Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: spring perches  (Read 1417 times)

0 Members and 1 Guest are viewing this topic.

bubba

  • Guest
spring perches
« on: August 21, 2006, 01:51:25 PM »
I am wondering if you can buy-or is it advised to use bolt on spring perches-want to do an axle swap-but cannot weld-I have friends that can...but I am just wondering if they are available to buy...thx
Logged

Becker

  • Guest
spring perches
« Reply #1 on: August 21, 2006, 04:05:10 PM »
I don't believe you can.  I think it would become an issue of them "slipping/twisting" under load.  

When I did my spring over I went to Standens and bought new perches there and had them welded to the axle.

Just my thoughts
Logged

JeepInMud

  • Guest
spring perches
« Reply #2 on: August 21, 2006, 04:41:38 PM »
I bought a set of spring perches that were the weld on style and then torqued them down with my u-bolts and then once I was happy with the pinion angle, I had them welded in.
Logged

bubba

  • Guest
spring perches
« Reply #3 on: August 21, 2006, 05:05:23 PM »
Yeh thats kinda what I was thinking-if I could get everything the way I wanted them to sit-the get the welded somewhere...thx for the replies...think I will do what JeepInMud said.....thx
Logged

unionjack

  • Guest
spring over axle?
« Reply #4 on: August 28, 2006, 05:24:09 PM »
just wondering how much it cost to do the leaf over axle, my only prob is im running dana 60's and the front diff has gussets or whatever on the top making it difficult to locate spring mount on top!!!!!!!!!!any suggestions?
Logged

Offline SPOT

  • Baby Wheeler
  • Posts: 94
Re: spring over axle?
« Reply #5 on: August 28, 2006, 09:39:03 PM »
Quote from: "unionjack"
just wondering how much it cost to do the leaf over axle, my only prob is im running dana 60's and the front diff has gussets or whatever on the top making it difficult to locate spring mount on top!!!!!!!!!!any suggestions?

you will also have to make your frame a 1/2 inch a side wider to fit the 60
Logged

unionjack

  • Guest
ouch
« Reply #6 on: August 29, 2006, 02:42:43 PM »
well leaving it the way it is ...............is sounding better and better
Logged
Pages: [1]   Go Up
« previous next »