Author Topic: 4WD Problems - FIXED (Read 1277 times)

TaTtOo · « **on:** November 23, 2006, 09:07:47 PM »

Anyone have any idea why my 4wd would stop working out of the blue? When I switch to 4 high nothing happens and when I switch to 4 lo it seems to be 2 lo. And the 4wd light is not coming on now (i guess because it is not engaging). Any ideas?

Cheers
Lawrence

cotaman · « **Reply #1 on:** November 23, 2006, 10:14:23 PM »

that is the front axle disconnect vacumn piece of crud acting up :roll: ... crawl underneath and check to see if all you vacumn lines are still attached... it just takes one to fall off in that system and suddenly your in 2 wheel drive :shock: . if that doesn't solve it.. check to see that you didn't break the shift fork in the front axle.... been known to happen.

Eugene

should have grabbed that posilok when i still had it

BlackYJ · « **Reply #2 on:** November 24, 2006, 07:17:28 AM »

Yep vacuum disconnect. I had the same problem, but I was able to my hands on a free one. Anyways here is a link to check out

http://www.4bangerjp.com/forums/viewtopic.php?t=506

It should enlighten you on all things vacuum disconnect

dunl · « **Reply #3 on:** November 24, 2006, 08:17:40 AM »

Quote from: "BlackYJ"

Yep vacuum disconnect. I had the same problem, but I was able to my hands on a free one. Anyways here is a link to check out

http://www.4bangerjp.com/forums/viewtopic.php?t=506

It should enlighten you on all things vacuum disconnect

You have to log in for that link.

BlackYJ · « **Reply #4 on:** November 24, 2006, 08:25:14 AM »

Quote from: "dunl"

Quote from: "BlackYJ"
Yep vacuum disconnect. I had the same problem, but I was able to my hands on a free one. Anyways here is a link to check out

http://www.4bangerjp.com/forums/viewtopic.php?t=506

It should enlighten you on all things vacuum disconnect

You have to log in for that link.

So whats you point. If you want a bunch of GOOD info, then register

dunl · « **Reply #5 on:** November 24, 2006, 08:52:47 AM »

There's GOOD things about 4 bangers? :lol:

dunl · « **Reply #6 on:** November 24, 2006, 09:10:37 AM »

Damm, bite my tongue - that's a good site.

TaTtOo · « **Reply #7 on:** November 24, 2006, 09:24:53 AM »

WOW I wish everything was as easy to fix......... the hoses were lose... done thx for the speedy replies

Cheers
Lawrence