Author Topic: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test. (Read 943 times)

AMCcrazy · « **on:** March 27, 2008, 08:02:07 PM »

OK so I mated Gregs tranny and motor and with a 2 hour fight with torque converter bolts(put in oversize bolts but converter was drilled 32nd of an inch off on two holes) I hoisted it high overhead and it began its journey back to life.

This is the test part.

What is wrong with this picture?

you have to look close
here is another angle

here it is in the bay I will put the tranny xmember on tommorrow and then wheel it back outside.

Rookie · « **Reply #1 on:** March 27, 2008, 08:42:35 PM »

Quote from: AMCcrazy on March 27, 2008, 08:02:07 PM

This is the test part.

What is wrong with this picture?

2 wheel drive tranny

divorced transfer case??

AMCcrazy · « **Reply #2 on:** March 27, 2008, 08:50:24 PM »

you are absolutely right.

Rookie · « **Reply #3 on:** March 27, 2008, 09:05:02 PM »

Quote from: AMCcrazy on March 27, 2008, 08:50:24 PM

you are absolutely right.

Do I win anything??

AMCcrazy · « **Reply #4 on:** March 27, 2008, 09:12:17 PM »

uh? I hadn't thought it that far through.

cLAY · « **Reply #5 on:** March 27, 2008, 09:32:39 PM »

ARGRRLL.....(homer drool...)

Calgary Jeep Association

Author Topic: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test. (Read 943 times)

AMCcrazy

Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.

Rookie

Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.

AMCcrazy

Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.

Rookie

Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.

AMCcrazy

Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.

cLAY

Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.