Calgary Jeep Association

Author Topic: Got the new 4x4 home.  (Read 1575 times)

0 Members and 1 Guest are viewing this topic.

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Got the new 4x4 home.
« on: September 09, 2008, 12:39:00 PM »
i went to the Montana border to pick up the 'new to me' truck. 97 12v Cummins.
The CSI border team sealed me in the garage and finetooth combed the truck. Nothing found and they confirmed the truck was very clean underneath. ;D
First on the to do list was to see Folk Automotive for the inspection and repairs.
All fluids were good which was a bonus except we did the oil/filter.
Front pass wheelbearing assembly was toast and one tierod end.
Tires rotated and alignment done.
Daytime headlights done.

A visit to my muffler guy and she was breathing easier!
Vinman will be doing some auxillary lighting set up tonight.

Line-X on Blackfoot did an awesome job of lining the box this a.m.
Surprisingly, after pulling the plastic cargo liner out on Saturday with help from a felow jeeper zjay, we found 2 things, the box was clean and rust free. We also found an inhabitant that has evaded the CSI team at the border...thank gawd as it might have been grounds for impounding :o
Looking at arachnoid species native to Florida it appears this one is a Brown Widow that some argue is more venomous than its cousin the Black widow. Travis and i were lucky to not have lifted that box out by the 'nest'.



Bed with no liner. The dark is not rust but ground in red dirt.


LineX.



Fancy Bluemarble rocker guard.







Next visit is DPS for some upgrades and also Moder Motors for some front end upgrades.



sent from my old school rotary dial phone.

Offline JasonL_031

  • Budget Lift
  • Posts: 284
    • http://www.cardomain.com/ride/2449290
Re: Got the new 4x4 home.
« Reply #1 on: September 09, 2008, 12:52:45 PM »
nice clean truck cant wait to see what your plans are for it i wish i had a cummings in my power wagon lol
1994 ZJ
6.5 inch custom lift
5.2L v8 with 5.9 exhaust
35x12.5r15 beadlocks
custom front bumper
98 leather interior
rugged ridge steering conversion
np231 tcase swap
HIDs
LED off road lights

Offline calltrex

  • Talks waaay too much!
  • Posts: 1398
Re: Got the new 4x4 home.
« Reply #2 on: September 29, 2008, 09:48:10 PM »
Heres my last truck without the 2" lift i put on it


« Last Edit: October 01, 2008, 08:05:53 AM by calltrex »
........___________
.......//.......""""......\\
....=//___________\\=
.....(@)___JEEP_(__@)
......\____I===I____/
.../""""/........J
../""""/=(=)___....../""""/
./___/............==/""""/
....................../___

93Zjay

  • Guest
Re: Got the new 4x4 home.
« Reply #3 on: September 30, 2008, 03:02:58 PM »
beautiful truck man!

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Got the new 4x4 home.
« Reply #4 on: October 01, 2008, 08:29:19 PM »
nice truck Dava, was it diesel?

UPDATE:
AEM Stage 2 Cold Air intake...done
Cat gone
Stock muffler gone
Aero exhaust...done (Calgary Muffler)
Killer dowel pin...done (DPS)
Timing and Valves...done (DPS)
Auto start/alarm...done (Visions on Macleod)
Driving lights...done (Thanks Vinman)
LineX...done (Blackfoot location)

Will be done:
Fuel plate and HP increase...Monday (DPS)
Solid steel steerbox brace and 03 Trackbar upgrade (Spot)







sent from my old school rotary dial phone.

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: Got the new 4x4 home.
« Reply #5 on: October 01, 2008, 08:38:56 PM »
Expect to be completely bent over on any Dodge forum if you don't list "getting gauges" with any engine mods.  They're pretty hardcore about the need to have them.
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline calltrex

  • Talks waaay too much!
  • Posts: 1398
Re: Got the new 4x4 home.
« Reply #6 on: October 01, 2008, 10:35:46 PM »
no diesel.  Gas

was awsome truck.

now i need a diesel truck and a trailer
........___________
.......//.......""""......\\
....=//___________\\=
.....(@)___JEEP_(__@)
......\____I===I____/
.../""""/........J
../""""/=(=)___....../""""/
./___/............==/""""/
....................../___

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Got the new 4x4 home.
« Reply #7 on: October 02, 2008, 09:27:54 AM »
Expect to be completely bent over on any Dodge forum if you don't list "getting gauges" with any engine mods.  They're pretty hardcore about the need to have them.
i am only going 100hp with ability to increase in future. The set up will allow towing travel or cargo trailers with no need for gauges. The auto tranny is the weakspot so i very much doubt i will ever completely bomb it. IF i do, than gauges will be done. i may do the 3g govenor kit at some point though.

Diesel trucks and trailers are kewl.
sent from my old school rotary dial phone.

Offline cablesmurf

  • Talks waaay too much!
  • Posts: 1538
  • Relapsed Jeep Addict
Re: Got the new 4x4 home.
« Reply #8 on: October 06, 2008, 01:45:50 PM »
Tom, what did the Line-X set you back? I want to get mine done, but if it's too pricey, I'll do it myself...again. It would just be waaaayy less work to have Line-X do it.

Dan
Hi, my name is Dan and I'm a Jeepaholic

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Got the new 4x4 home.
« Reply #9 on: October 06, 2008, 04:48:01 PM »
Tom, what did the Line-X set you back? I want to get mine done, but if it's too pricey, I'll do it myself...again. It would just be waaaayy less work to have Line-X do it.

Dan
you have mail.
sent from my old school rotary dial phone.