Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Rust proofing and paint  (Read 1843 times)

0 Members and 1 Guest are viewing this topic.

subydood

  • Guest
Rust proofing and paint
« on: October 21, 2008, 06:29:25 PM »
Hey everyone, I'm kind of new to the city and even newer to this forum.
I have a 1999 Xj and I want to get it rust proofed for the winter. Where do you guys go to get that done? Any suggestions?

Also on my rocker there is rust showing up a bit, I would like to have that painted with rock guard or similar product to prevent the rusting.

Any input on where I could get that done?

Many thanks to all!

Cheers!
Logged

Offline sylvrinvader

  • That CB Yapper
  • Posts: 606
  • the micro wheeler
Re: Rust proofing and paint
« Reply #1 on: October 21, 2008, 06:56:34 PM »
i love rockguard cause its cheap $$$  ;D it looks good  :) and easy to re-do if it peals off  :)
Logged
03 TJ, 33" BFG's,4:88 gears  BBoost, CB, custom front bumper,  insta/extenda trunks, rugged ridge roof rack w/basket

Offline Gearhead

  • Talks waaay too much!
  • Posts: 1161
Re: Rust proofing and paint
« Reply #2 on: October 21, 2008, 07:07:16 PM »
Rust never sleeps , cover it up & it will be back   and worse !
Logged

subydood

  • Guest
Re: Rust proofing and paint
« Reply #3 on: October 21, 2008, 09:03:04 PM »
Quote from: sylvrinvader on October 21, 2008, 06:56:34 PM
i love rockguard cause its cheap $$$  ;D it looks good  :) and easy to re-do if it peals off  :)

Did you do it yourself? Did you use a compressor and paint gun?

I mean to threat the rust before I paint over it, hopefully it'll be good for a while.
Logged

Offline sylvrinvader

  • That CB Yapper
  • Posts: 606
  • the micro wheeler
Re: Rust proofing and paint
« Reply #4 on: October 22, 2008, 08:05:43 PM »
i just sanded the poop-da loop out of the rust the best i could until i saw clean metal and sprayed away. i have an o3 tj and its no street queen but also no piece of poop
Logged
03 TJ, 33" BFG's,4:88 gears  BBoost, CB, custom front bumper,  insta/extenda trunks, rugged ridge roof rack w/basket

subydood

  • Guest
Re: Rust proofing and paint
« Reply #5 on: October 22, 2008, 09:07:54 PM »
Where can I get the rockguard and how much does it cost? Also does it come in different colors?
Thanks!
Logged

Offline sylvrinvader

  • That CB Yapper
  • Posts: 606
  • the micro wheeler
Re: Rust proofing and paint
« Reply #6 on: October 22, 2008, 09:14:26 PM »
i bought mine at c/tire and when it dries you can paint over it for about $6 to $8 a can or you can spend mor and get it by the gallon and roll it on. i waited for a sale and got 50% off for mine and got 15 cans nod only used 2 so far .
 
Logged
03 TJ, 33" BFG's,4:88 gears  BBoost, CB, custom front bumper,  insta/extenda trunks, rugged ridge roof rack w/basket

Offline barmanjay

  • That CB Yapper
  • Posts: 729
  • Wanna buy a trail? or Garage w/attached house?
Re: Rust proofing and paint
« Reply #7 on: October 22, 2008, 11:53:37 PM »
Quote from: subydood on October 22, 2008, 09:07:54 PM
Where can I get the rockguard and how much does it cost? Also does it come in different colors?
Thanks!

Autovalue carries it too

Their prices went up to about $7/can

make sure its the rockerpanel rock guard,.. most of the other stuff cannot be painted and is rubberized.

As for getting at the rust,.. if you want to have it stop all together,.. you have to grind all of it off,.. I think there is also a heavy duty rust stopper I've heard of - Por 15? Apparently the best stuff on the market, but I don't know where to get the stuff, nor have I ever seen it.
Logged
The realtor that gets dirty
Dirty Old YJ , 4" spring lift and 33's  - Sold - *snif*
300C SRT8 - Workmobile

Jason Kim
Realtor
Maxwell City Central
889-4747

www.jaykim.ca

subydood

  • Guest
Re: Rust proofing and paint
« Reply #8 on: October 23, 2008, 07:18:52 PM »
What colour does it come in the one you cannot paint over? I would'nt mind black on my red Xj.
Logged

Offline Toyman

  • UberWheeler
  • Posts: 435
Re: Rust proofing and paint
« Reply #9 on: October 23, 2008, 07:24:09 PM »
If you rockgaurd, make sure all of the rust is removed first or it will rust underneath the rockgaurd.  Personally, I would just remove all the surface rust first, prime it, and then paint. 
Logged
04 Rubi

Offline barmanjay

  • That CB Yapper
  • Posts: 729
  • Wanna buy a trail? or Garage w/attached house?
Re: Rust proofing and paint
« Reply #10 on: October 23, 2008, 09:29:03 PM »
Quote from: subydood on October 23, 2008, 07:18:52 PM
What colour does it come in the one you cannot paint over? I would'nt mind black on my red Xj.

Black
Logged
The realtor that gets dirty
Dirty Old YJ , 4" spring lift and 33's  - Sold - *snif*
300C SRT8 - Workmobile

Jason Kim
Realtor
Maxwell City Central
889-4747

www.jaykim.ca

Offline i_go_commando

  • UberWheeler
  • Posts: 350
Re: Rust proofing and paint
« Reply #11 on: October 24, 2008, 07:20:12 PM »
i like tremclad, but not the arosal stuff. it doesnt go on thick enough. I wire whhell down to steel and then brush on 2 or 3 good coats. I do however thin it out a bit so it doesnt show the brush strokes as much. I have sprayed it to, but it doesnt stay glossy for very long.
Logged
1973 jeep commando -amc 360, 727,203/208, waggy d 44 and amc20- soa, OBA- on hiatus
1958 fc 170 cabover quad cab 3/4 pickup.continetal engine/ 700r4/ dana 300 current project

subydood

  • Guest
Re: Rust proofing and paint
« Reply #12 on: October 24, 2008, 08:46:19 PM »
I think I'm gonna go with that rockguard and make sure I sand to bare metal and then prime before putting the rockguard on.

As far as rust proofing is there anywhere around town to get your undercarriage shooted with rustproofing oil?
Logged

Offline sylvrinvader

  • That CB Yapper
  • Posts: 606
  • the micro wheeler
Re: Rust proofing and paint
« Reply #13 on: October 24, 2008, 09:05:16 PM »
do you want a hand where are you in the city
Logged
03 TJ, 33" BFG's,4:88 gears  BBoost, CB, custom front bumper,  insta/extenda trunks, rugged ridge roof rack w/basket

subydood

  • Guest
Re: Rust proofing and paint
« Reply #14 on: October 25, 2008, 10:16:04 AM »
I'm in N.E but I should be okay to do this job.
Many thanks for the help though
Logged
Pages: [1]   Go Up
« previous next »