Calgary Jeep Association

Author Topic: Phase one completed  (Read 3096 times)

0 Members and 3 Guests are viewing this topic.

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Phase one completed
« on: November 19, 2008, 06:25:12 PM »
A couple of quick pics, no serious wheeling but I've had it out in the field flexing and checking for fab errors.
So far so good
Diesel runs good and strong, and the Jeep performs really well off road
No pics with the LTB's on, their a hand full on the road, more front alignment work to do ;)






3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline cuzican

  • That CB Yapper
  • Posts: 525
Re: Phase one completed
« Reply #1 on: November 19, 2008, 06:48:36 PM »
Looking good.
Southern Alberta Coulee Kruzer (new name same great wheelers)
97 TJ with improvements,  05 TJ Unlimited, 06 TJ Rubicon

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Phase one completed
« Reply #2 on: November 19, 2008, 06:53:37 PM »
Thanks Stephen,
Went for a drive topless last week,
I hope this cold passes soon ;D
It was some chilly at 100kph
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline .:.Dingman.:.

  • That CB Yapper
  • Posts: 584
Re: Phase one completed
« Reply #3 on: November 19, 2008, 07:19:08 PM »
diesel?" i want pics -drools-

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Phase one completed
« Reply #4 on: November 19, 2008, 07:34:42 PM »
Here you go Dingman ;D




3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline .:.Dingman.:.

  • That CB Yapper
  • Posts: 584
Re: Phase one completed
« Reply #5 on: November 19, 2008, 07:56:00 PM »
cummings 4bt correct?  got any other pics, this is making me feel all warm and fuzzy.

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Phase one completed
« Reply #6 on: November 19, 2008, 08:04:56 PM »
YEP,
As long as your only getting warm and fuzzy not hot and moist ;)

Back of engine

Intercooler install

Mock up

Oil pan diff clearance - Safety Ubolts :D
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline .:.Dingman.:.

  • That CB Yapper
  • Posts: 584
Re: Phase one completed
« Reply #7 on: November 19, 2008, 08:10:50 PM »
that thing is awesome my dads trying to talk me into putting a 4bt into my zj rather then buying a new truck what does she run on the dyno?

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Phase one completed
« Reply #8 on: November 19, 2008, 09:09:11 PM »
FActory numbers are 120 HP about 190 to 200 FT/LB torque  :)
With the 700R4 and keeping my foot out of the throttle ;)
Should be  around 30 MPG :D
Running on home made Biodiesel ;D
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline .:.Dingman.:.

  • That CB Yapper
  • Posts: 584
Re: Phase one completed
« Reply #9 on: November 19, 2008, 09:17:57 PM »
holy your full of info where did you get your biodiesel kit? and more info please

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Phase one completed
« Reply #10 on: November 19, 2008, 09:32:33 PM »
Made it.
Google  journey to forever
Lots of real good info there - I think it's called an appleseed reactor.
And yes I am full of...info :o
« Last Edit: November 19, 2008, 09:35:26 PM by Fredduck »
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: Phase one completed
« Reply #11 on: November 19, 2008, 09:34:40 PM »
Ok...now that is freakin' excellent. I wish I could slide one into my JK.
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline Ostego

  • UberWheeler
  • Posts: 306
  • Full Size Jeep
Re: Phase one completed
« Reply #12 on: November 20, 2008, 08:26:56 AM »
Wow that's pretty cool. :D
'95 ZJ: 3" Budget lift, quick-disconnects, 31x10.5 Savero MT's
'74 J20: 401, Holley Street Avenger 4 barrel, custom  camper.
'75 F100: 351M, 5" Super Lift.

Offline JasonL_031

  • Budget Lift
  • Posts: 284
    • http://www.cardomain.com/ride/2449290
Re: Phase one completed
« Reply #13 on: November 20, 2008, 12:20:05 PM »
sweet ride  great work
1994 ZJ
6.5 inch custom lift
5.2L v8 with 5.9 exhaust
35x12.5r15 beadlocks
custom front bumper
98 leather interior
rugged ridge steering conversion
np231 tcase swap
HIDs
LED off road lights

Offline cuzican

  • That CB Yapper
  • Posts: 525
Re: Phase one completed
« Reply #14 on: November 20, 2008, 10:21:24 PM »
Whats left to do? i.e. phase two?

I still haven't gotten the flares off for you and your ride looks too nice for trail beaten stuff anyhow.
Southern Alberta Coulee Kruzer (new name same great wheelers)
97 TJ with improvements,  05 TJ Unlimited, 06 TJ Rubicon