Calgary Jeep Association

Author Topic: Getting lifted in Calgary - KJ 02  (Read 1310 times)

0 Members and 4 Guests are viewing this topic.

kIT

  • Guest
Getting lifted in Calgary - KJ 02
« on: December 26, 2008, 11:35:35 PM »
Hey guys, I'm new to this and I'm no tech oriented.   My buddy recommended that I go to Modern to get my lift done on my 02 KJ Sport.   What would you guys recommend if I have a $1000-2000 budget?   I'm looking into at least a 2.5" lift.   And what are my options on tires?   Would 32's fit?  What lift kit do u guys recommend?   :-[

Offline frenchy

  • Talks waaay too much!
  • Posts: 1417
Re: Getting lifted in Calgary - KJ 02
« Reply #1 on: December 27, 2008, 12:20:53 AM »
CHANDA precision motorworks 287-3350 for all your 4x4 needs!
Jeep
With stuff

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: Getting lifted in Calgary - KJ 02
« Reply #2 on: December 27, 2008, 09:10:38 AM »
Before you run off anywhere, you need to do your research (which you;re doing, good for you).

Here's  a KJ owner's forum..check around here a bit:
http://www.lostkjs.com/forum/phpBB2/

Also, he hasn't been on here since October, but if you PM him he might respond.  Look for "m0th" (m - zero - t-h)...he used to have a kick arse Green KJ, not sure but I think he still has it. He'd probably love to talk to another KJ owner, as you guys are kinda rare.

Dunl
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Getting lifted in Calgary - KJ 02
« Reply #3 on: December 27, 2008, 10:30:17 AM »
i used to wheel with a guy that had a lifted kj, he sais the only good lift is the Frankenlift. its a mix of the best parts from all the lift kits out there for the kj. apparently there are a bunch of different lifts but they all have weak points. ive seen the old man emu kit, it looked pretty good. and Deaver has rear springs for the kj as well. good luck, do some research though.
YJ=Y’all Jealous

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: Getting lifted in Calgary - KJ 02
« Reply #4 on: December 27, 2008, 11:03:56 AM »
I believe that was what m0th was running too.
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Getting lifted in Calgary - KJ 02
« Reply #5 on: December 28, 2008, 12:07:18 PM »
http://www.boulderbars.com/kjproducts.htm
thats the link to the frankenlift
YJ=Y’all Jealous

Offline big black dodge

  • Budget Lift
  • Posts: 215
Re: Getting lifted in Calgary - KJ 02
« Reply #6 on: December 28, 2008, 05:48:45 PM »
i thought with a 2.5" spacer you can fit 35's on them - look awesome too.   would loose a lot of power though, especially if you have an auto.
81 CJ7 350, SM 465, Dana 300,  dual dana 44, 4" lift, soon 33" TSL

P-Dubb

  • Guest
Re: Getting lifted in Calgary - KJ 02
« Reply #7 on: December 28, 2008, 06:24:51 PM »
ive never seen one of these done up...

Offline RckyMtnTJ

  • UberWheeler
  • Posts: 393
    • http://www3.telus.net/lck
Re: Getting lifted in Calgary - KJ 02
« Reply #8 on: December 29, 2008, 12:11:15 AM »
i thought with a 2.5" spacer you can fit 35's on them - look awesome too.   would loose a lot of power though, especially if you have an auto.

Depends if you are talking a KJ ( Liberty) or a JK (Wrangler).  Seems everyone is talking Liberty.
98 TJ 4" lift + goodies

Offline big black dodge

  • Budget Lift
  • Posts: 215
Re: Getting lifted in Calgary - KJ 02
« Reply #9 on: December 29, 2008, 07:03:55 AM »
just saw the title and assumed a JK.  if it's a liberty, than nevermind
81 CJ7 350, SM 465, Dana 300,  dual dana 44, 4" lift, soon 33" TSL

P-Dubb

  • Guest
Re: Getting lifted in Calgary - KJ 02
« Reply #10 on: December 29, 2008, 06:00:52 PM »
think i remember seeing that skyjacker makes a lift for em, on there site i think i saw it