Calgary Jeep Association

« previous next »
Pages: [1] 2 3   Go Down

Author Topic: i got the shakes  (Read 4328 times)

0 Members and 1 Guest are viewing this topic.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
i got the shakes
« on: May 30, 2009, 12:11:55 PM »
so i picked up an 02 Dodge the other day and on the highway i noticed that i get a good case of the shakes over 100 km/h.  i can feel it in the floorboards and the seat of my pants but not so much in the steering wheel i don't think at least.  now i know my YJ shakes at all sorts of speeds due to tires, is this the same thing?  i'm guessing the tires aren't balanced very well, or at all.   just thought i would ask if anyone else has an idea asides from teh balancing before i goto crappy tires, unless someone on the board wants to do it for me!  i pay in beer :D 

thanks guys!
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline esi

  • That CB Yapper
  • Posts: 633
Re: i got the shakes
« Reply #1 on: May 30, 2009, 12:22:46 PM »
usually balancing will feedback to the wheel as well. but sometimes not. Maybe a separating or bruised tire? I can balance them for you as well. PM me
Logged
Formerly of Boots & Boost Inc
Back farming and fabricating again.

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: i got the shakes
« Reply #2 on: May 30, 2009, 12:50:04 PM »
Yeah, balancing or alignment. I know my shakes went away after an alignment. And really? You bought another vehicle?  I'll swing by today sometime.
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: i got the shakes
« Reply #3 on: May 30, 2009, 02:30:58 PM »
ya come on over fras
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline Gearhead

  • Talks waaay too much!
  • Posts: 1161
Re: i got the shakes
« Reply #4 on: May 30, 2009, 06:40:05 PM »
Likely a bad tire  ,   Possibly internal tire issue.  See if the rims are straight.

Wayyyy  back , when I was a bit of a bozo  , I was doing donuts and hit a curb , bending a perfectly good rim.  This was more than twenty years before that truck was built .
« Last Edit: May 31, 2009, 09:37:21 AM by Gearhead »
Logged

Offline stroker sahara

  • UberWheeler
  • Posts: 361
Re: i got the shakes
« Reply #5 on: May 30, 2009, 10:44:04 PM »
I have heard that Dodges are bad for track bars.
Logged
If you want to run with the big dogs you have to be able to pee in the tall grass.


1989 YJ SOA, 36" SX, 4.6 Stroker...

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: i got the shakes
« Reply #6 on: May 31, 2009, 11:55:08 AM »
1500 or 2500/3500? 2nd gen or 3rd gen?

The suspension is of the same design as your ZJ. Check the trac bar. The 2nd gens had crappy trac bars, there is a kit out there though to let you upgrade it to a 3rd gen trac bar.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: i got the shakes
« Reply #7 on: May 31, 2009, 03:43:44 PM »
imp retty certain the 2001 was the last year of the front solid axle on the 1500's. and if johnny has a 2002 1500 then he has the ifs with torsion bars... boo. as for the shakes, id start with balancing the wheels. check to be sure the rims are indeed straight and are full of air.
so johnny, do you have pics of this truck for us? what are the details???
Logged
YJ=Y’all Jealous

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: i got the shakes
« Reply #8 on: May 31, 2009, 06:57:55 PM »
ahh Eric you are so right you know your stuff.  its an 02 Dodge Ram 1500, its the first year new body style.  came with the 3.7/4.7 or 5.9 engines. the 2500/3500s in 02 i believe remained the same body style and solid axle.  i gots the 5.9L and thus far like it.  as far as undercarriage, it is no longer a front axle; is IFS with rack and pinion steering, and hence, no track bars, that would have been the first place i look! (i did, thats why i know its not there!)
anyways, jacked up the front end today, did the shake test (grab wheel at 3 - 9 and 6 - 12 check for movement)  and everything seems tight.  now, tires i'm sure is the issue. back tires are different than the fronts but similar. i'm gonna get em balanced soon (this week)  i didn't want to get new skins till winter time though, however when i do i'd probalby get rims/tirs cause i there is always the possibility the rim/rims are bent or something

anyways, PICS! this will tenatively be the new tow rig when/if i get a trailer for those longer wheelin trips!




Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: i got the shakes
« Reply #9 on: May 31, 2009, 07:28:47 PM »
I just drove by now and it looks good.  Now you have no space around your house ;D

I was gonna stop in but it looked like no one was home
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: i got the shakes
« Reply #10 on: May 31, 2009, 07:31:55 PM »
Quote from: fraserb1986 on May 31, 2009, 07:28:47 PM
I just drove by now and it looks good.  Now you have no space around your house ;D

I was gonna stop in but it looked like no one was home
two jeeps and a dodge and u though no one was home  :o  lol
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: i got the shakes
« Reply #11 on: May 31, 2009, 10:38:38 PM »
looks good man! nice to see a t/case shifter on the floor. mega bonus. be sure that the tire size is the same front to rear obviously. but im sure its a tire issue more so then a rim issue, but ya never know.

Logged
YJ=Y’all Jealous

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: i got the shakes
« Reply #12 on: June 01, 2009, 10:31:38 AM »
ya. i tried to stay away from anything with push button. NOT a fan.  tires are the same size, only difference (and if u look close you'll see) is the fronts are 'tracker 2s' and the rears just 'trackers' or the other way around.  i will put new tires on a little closer to the winter but for now, it'd be nice just to get it to not shimmy!
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: i got the shakes
« Reply #13 on: June 07, 2009, 12:49:20 PM »
so i have gotten the tires balanced and unfortunately the shimmy is still there. its a little less now but still everpresent........ so are my tires pooched?
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline slimbeam

  • UberWheeler
  • Posts: 407
  • 4" RE,3"body,35"rubber,dana 44 rear,sye,KEW winch
Re: i got the shakes
« Reply #14 on: June 07, 2009, 02:45:21 PM »
 could be drive shaft is out of balance, check and see if the factory weights are still on it
Logged
I started out with nothing and so far I have most of it left
Pages: [1] 2 3   Go Up
« previous next »