Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: XJ ubolts  (Read 2188 times)

0 Members and 3 Guests are viewing this topic.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
XJ ubolts
« on: June 22, 2009, 12:25:19 PM »
hi all, buddy's pickin up a lift for his XJ, just wondering what ubolts he needs for the rear. he has the D44 axle. are the ubolts teh same as the 8.25 (3") or is it closer to the D35 (2.75") 
so i guess, if he were to order a lift kit that did not have a D44 option, what ubolts would work best? thanks
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: XJ ubolts
« Reply #1 on: June 22, 2009, 02:19:47 PM »
The d44 is the bigger of the axle tubes. I know the 8.25 is 3" inside not forsure about d44.I can try to take a measurement when I get a chance.
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: XJ ubolts
« Reply #2 on: June 22, 2009, 02:38:09 PM »
Quote from: JOhnnyC on June 22, 2009, 12:25:19 PM
hi all, buddy's pickin up a lift for his XJ, just wondering what ubolts he needs for the rear. he has the D44 axle. are the ubolts teh same as the 8.25 (3") or is it closer to the D35 (2.75") 
so i guess, if he were to order a lift kit that did not have a D44 option, what ubolts would work best? thanks
d44 has smaller tubes than 8.25
take old ones to standens get new ones made to the spec you need.
Logged
Like ivry soap....pure as frack
DD
Get at me Wolf

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Re: XJ ubolts
« Reply #3 on: June 22, 2009, 02:40:25 PM »
thats where i got mine done  ;D
Logged
1984 Chevy 6" Lift 40" Boggers

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: XJ ubolts
« Reply #4 on: June 22, 2009, 03:38:15 PM »
thanks guys.

the 3.25 is indeed 3" the D35 is 2.75"  at least i knwo that much for ubolts........... just don't wknow which one it is (ubolts come in kit, but not sure what)  gonna measure tonight to be sure.  Nathan, when we pull it apart just want to put it abck together. trying for this weekend so we can wheel july long so time is precious (u knwo how it is!)

thanks again and if u wanna measure your D44 that'd be sweet :D
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: XJ ubolts
« Reply #5 on: June 22, 2009, 04:36:54 PM »
XJ D44 axel tubes 2.765inches
u bolts seam to be about 2.8inches inside thats with them on anyway ;D
Logged
Like ivry soap....pure as frack
DD
Get at me Wolf

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: XJ ubolts
« Reply #6 on: June 22, 2009, 07:12:46 PM »
so u think the 2.75 ubolts will work??? 
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline cotaman

  • UberWheeler
  • Posts: 371
Re: XJ ubolts
« Reply #7 on: June 22, 2009, 07:14:21 PM »
so nathan... break out the mic for that   :P
Logged
98 ZJ, 5" lift, 4.10's, 33" Dick Cepek Mud Country's, 231 swap,  winch/bumper, rock rails, lincoln locker, CB, parked, waiting to pass SK insp
01 WJ, the pavement princess that has been mirror deep in a hole
RIP -- 88 XJ, 3" Skyjacker, 31 MT

Offline S-FLY

  • Budget Lift
  • Posts: 203
  • '94 XJ
Re: XJ ubolts
« Reply #8 on: June 22, 2009, 08:27:35 PM »
Quote from: dubbleJ's on June 22, 2009, 02:19:47 PM
The d44 is the bigger of the axle tubes. I know the 8.25 is 3" inside not forsure about d44.I can try to take a measurement when I get a chance.

You're running a D44?  :o
Logged
ve1sly

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: XJ ubolts
« Reply #9 on: June 22, 2009, 09:05:34 PM »
I'm runnin a 8.25 but have a d44 waitin to bolt into somethin! Aha

Ya I tried to measure the tube and it looked like about 2-7/8.kinds hard to measur though.
The inside measuremnt of an old d35 ubolt I had lying around was def smaller than 2.75.
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: XJ ubolts
« Reply #10 on: June 23, 2009, 10:46:30 AM »
Quote from: cotaman on June 22, 2009, 07:14:21 PM
so nathan... break out the mic for that   :P
Nope just the 12in vern

2.75 will be a bit tight but might work

I had a D44 till it went in the GFs jeep ;)
Logged
Like ivry soap....pure as frack
DD
Get at me Wolf

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: XJ ubolts
« Reply #11 on: June 23, 2009, 11:02:50 AM »
bah.  GFs don't need D44s ;)   (actually your might with that lead foot of hers ;) )   lol

well the kit comes with either a 3" or a 2.75" either way it comes with u bolt so figure, which 'could' work better. worst case scenario we get some made, no biggie.  but what do you think?
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: XJ ubolts
« Reply #12 on: June 23, 2009, 11:04:43 AM »
Quote from: JOhnnyC on June 23, 2009, 11:02:50 AM
bah.  GFs don't need D44s ;)   (actually your might with that lead foot of hers ;) )   lol

well the kit comes with either a 3" or a 2.75" either way it comes with u bolt so figure, which 'could' work better. worst case scenario we get some made, no biggie.  but what do you think?
I think i always get them made by standins :P
Logged
Like ivry soap....pure as frack
DD
Get at me Wolf
Pages: [1]   Go Up
« previous next »