Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Greaseable Bolts  (Read 1393 times)

0 Members and 1 Guest are viewing this topic.

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Greaseable Bolts
« on: July 07, 2009, 11:15:23 AM »
I need to get some new greaseable bolts (1/2") and I am wondering where I can get them in town
Logged
'95 YJ with a few mods

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Greaseable Bolts
« Reply #1 on: July 07, 2009, 11:50:23 AM »
for shackles kind of deal?  i have the rubicon express ones scott, got them at Modern.........  BUT they also came with my shackle kits i ordered
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Re: Greaseable Bolts
« Reply #2 on: July 07, 2009, 12:21:47 PM »
Yeah they are for my shackles.  I got some when I got my MORE booms but the nipples are just pressed in and they keep popping off when I try to grease them
Logged
'95 YJ with a few mods

Offline slimbeam

  • UberWheeler
  • Posts: 407
  • 4" RE,3"body,35"rubber,dana 44 rear,sye,KEW winch
Re: Greaseable Bolts
« Reply #3 on: July 07, 2009, 12:51:14 PM »
is it possible to tap some treads in them
Logged
I started out with nothing and so far I have most of it left

Offline RckyMtnTJ

  • UberWheeler
  • Posts: 393
    • http://www3.telus.net/lck
Re: Greaseable Bolts
« Reply #4 on: July 07, 2009, 01:42:25 PM »
Quote from: slimbeam on July 07, 2009, 12:51:14 PM
is it possible to tap some treads in them


When I bought some Currie Control arms off ebay, they didn't come with enough bolts.  A guy in the toolroom at my work did just that for me.  I imagine you could find a shop in Calgary to do it.  I know Currie's bolts are expensive.  A shop would probably be more.
Logged
98 TJ 4" lift + goodies

Offline calltrex

  • Talks waaay too much!
  • Posts: 1398
Re: Greaseable Bolts
« Reply #5 on: July 07, 2009, 09:31:38 PM »
I got them from Standens before..
Logged
........___________
.......//.......""""......\\
....=//___________\\=
.....(@)___JEEP_(__@)
......\____I===I____/
.../""""/........J
../""""/=(=)___....../""""/
./___/............==/""""/
....................../___

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: Greaseable Bolts
« Reply #6 on: July 09, 2009, 11:06:46 AM »
Just get some press ins with no ball. Press ins should not have a check valve ball because of the exact problem of spitting them out.

Or tap them if they are actually coming out to easily.
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]
Pages: [1]   Go Up
« previous next »