Calgary Jeep Association

Author Topic: kinda crappy holidays  (Read 2482 times)

0 Members and 2 Guests are viewing this topic.

Offline Pookapotamus

  • Talks waaay too much!
  • Posts: 1123
kinda crappy holidays
« on: January 02, 2010, 08:52:37 AM »
well my holidays were kinda crappy this year because of this:



we were on our way to north battleford sask and got way out in the middle of nowhere when we started to hear a clunking sound from the front end, we had the death wobble twice earlire on our trip when we flew over rail road tracks (this death wobble has been an ongoing problem for a while) so i figured it was some thing to do with that and stoppet the jeep and got out to check. i grabbed both front tires and shook the snot out of them trying to feel for any play, i could feel nothing! so we continued on our way as the clunk was really minor. we got another 100km and all of a sudden the clunk gets really loud so once again i stop the jeep and shake every thing for a clue to whats going on, and again cant feel anything i even crawled under the jeep and checked the drive shafts and still could not figure anything out.

so me and Mrs. Pook decide to head for the nearest town that has a garage (thanks to my new gps ;D )all the while the clunk is getting horrible and i am panicing as to wtf is wrong with the front end, was thinking pinnion bearing bit the big one. when suddenly the front tire makes a break for freadom and passes us! the jeep dropped onto its rotor and we slid to a stop watching the front tire playing in the snow in the ditch. so now it is painfully obvious that the lugnuts came loose and i am cursing myself for not catching this. so long story short Mrs. Pook rounded up the renagade tire while i jacked the jeep up and stole nuts from the other tires to bolt it back on, took it to a tire shop bought some new nuts and off we went.


i am pretty sure the rim is buggered from the hammering it took as we drove on it for a good 20 km with loose nuts. but at least we were lucky that we were only doing 60 when the tire came off and there was no traffic comming the other way for the tire to hit. and that none of the studs were damaged. although i need a new rotor as i lost a good half inch from this one after is scraped on the ground.

so i hope everyone else had a better holiday than me this year and i wish everyone the best of luck in the new year!

Offline specialk

  • CJA Executive
  • Talks waaay too much!
  • Posts: 3176
Re: kinda crappy holidays
« Reply #1 on: January 02, 2010, 09:08:45 AM »
Glad to hear you guys are ok.  What rims?  The new ones? 

Need to borrow my torque wrench buddy?  ;)
04 TJ Rubi

Offline Pookapotamus

  • Talks waaay too much!
  • Posts: 1123
Re: kinda crappy holidays
« Reply #2 on: January 02, 2010, 09:29:37 AM »
no they were the old crappy rims, and i have my own torque wench, just cant figure out how these came off?  ???

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: kinda crappy holidays
« Reply #3 on: January 02, 2010, 10:34:45 AM »
You also need a new sway bar link. DD it without the sway bar hooked up isn't a good idea......
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline Pookapotamus

  • Talks waaay too much!
  • Posts: 1123
Re: kinda crappy holidays
« Reply #4 on: January 02, 2010, 11:16:20 AM »
ya clay thats been off for a couple of months just never got around to buying new ones ::)

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: kinda crappy holidays
« Reply #5 on: January 02, 2010, 11:32:23 AM »
You're safe, Mrs. Pook is safe....you might feel kind of stupid (and anyone would), but the main thing is you guys are safe. 

That's the good thing.  :)
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: kinda crappy holidays
« Reply #6 on: January 02, 2010, 11:32:39 AM »
Good thing you have the tools and the ablity to do a field repair and there was no real disaster like a rollover or headon.

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: kinda crappy holidays
« Reply #7 on: January 02, 2010, 12:02:21 PM »
snug up all the nuts than use the torque wrench after the wait of the jeep is on the rim.
Like ivry soap....pure as frack
DD
Get at me Wolf

Offline esi

  • That CB Yapper
  • Posts: 633
Re: kinda crappy holidays
« Reply #8 on: January 02, 2010, 12:10:35 PM »
I've had rims start to loosen. It seems with alluminum wheels and the thread pitch of the studs, that you have to check the lugs a couple of times after taking a wheel off. if you need studs I have some spare studs around
Formerly of Boots & Boost Inc
Back farming and fabricating again.

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: kinda crappy holidays
« Reply #9 on: January 02, 2010, 01:17:58 PM »
No front trac bar hooked up and the wheel came off..... You and your wife are lucky, REALLY lucky....... :-\
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: kinda crappy holidays
« Reply #10 on: January 02, 2010, 04:53:55 PM »
wow. thats a gooder! like others have said, it could have been way worse. my dad lost a rear wheel on his truck years ago. as the tire came off it went behind and the box of the truck came down hard on it. pretty much crumpling the box side. he'd been driving for about an hour and was just turning onto our street when it happened. i kinda laughed. but it could have been bad if it was on the highway.
happy new year :)
YJ=Y’all Jealous

MB.Muffin

  • Guest
Re: kinda crappy holidays
« Reply #11 on: January 03, 2010, 11:41:59 PM »
I'm sorry you had a crappy holiday.... but i've experienced losing the tire AND having to chase it... but I had to chase it thru Calgary traffic on 68th Street and 16th Ave. Not Fun... But all the same it was pretty funny when it happened to me lol.

hope you get it all fixed up. :)

Offline Zombie

  • UberWheeler
  • Posts: 398
  • Jeff the Zombie Jeep
Re: kinda crappy holidays
« Reply #12 on: January 03, 2010, 11:42:52 PM »
snug up all the nuts than use the torque wrench after the wait of the jeep is on the rim.

I agree with the snug them up making sure the lugs are centered in the lug holes(happends with aftermarket wheels with larger hubs) but torque the wheel without any load on it. use a wheel chock while it is in the air.
then about 50 km later check the torque. if the rotors are warm, the nuts will tighten a little more than the rear(I figure this has to do with the heat stretching the studs a little or something like that).


Glad you are ok though.
97 Red XJ, 4.5", 31" mud's, ARB front, 9500lb winch, bushwhacker's, warn sliders, HnT SYE and CV drive shaft - written off and sold for parts :(

Offline LifesGrand

  • UberWheeler
  • Posts: 364
Re: kinda crappy holidays
« Reply #13 on: January 04, 2010, 05:01:21 PM »
95 ZJ v8 Ltd.

I called the number on the T.V. set & turned my gold in for cash....

YoungFluff03TJ

  • Guest
Re: kinda crappy holidays
« Reply #14 on: January 04, 2010, 08:55:42 PM »
Aw man that sucks. Saw a guy over summer who had the same problem on his way home from Mclean :(
BTW I have 2 sway bar end links from my TJ that I had on for about 2 months before I lifted it. In case you wanna snatch them up ;)