Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Transfer Case  (Read 658 times)

0 Members and 1 Guest are viewing this topic.

prelude48

  • Guest
Transfer Case
« on: March 17, 2010, 09:34:41 PM »
Hey Guys,

I have a 242j transfer case that is making a lot of noise at highway speeds, not sure if its bearings or chain,  Is it worth pulling apart
and replacing the chain and bearings or just buy a used one from a guy in Airdrie for 350? can someone recommend a good place to
buy replacement parts, or can i just call Auto value or part source etc.

Thanks

98 cherokee limited  255,000km
Logged

Offline .:.Dingman.:.

  • That CB Yapper
  • Posts: 584
Re: Transfer Case
« Reply #1 on: March 17, 2010, 09:58:53 PM »
Oh wow I rebuilt my 242 because my 249 ate poopie. I wouldn't buy used for 350 you can rebuild your 242 I have a 242 manual you're welcome to have and if you need help rebuilding it send me a message I'm more then willing to get my hands dirty. Also I have a list of the bearing and seal numbers kicking around.  Ps pnp charges 150 for a used case so 350 is pretty up there in price

Dingman
Logged

Offline Justink

  • Budget Lift
  • Posts: 278
  • '89 comanche 5'' lift, 33's
Re: Transfer Case
« Reply #2 on: March 17, 2010, 10:02:54 PM »
Would one outta a '89 cherokee work?  if so I have one,  it's getting high in mileage (450,xxx)?  could have a new one for all I know.  Offers?
Logged
'89 Comanche 5'' 33's, dana 44 playtoy
'91 cherokee 4.5'' 31's DD
'88 Nissan 300zx just for fun
If it seems like a good idea at the time it probably isn't!

prelude48

  • Guest
Re: Transfer Case
« Reply #3 on: March 17, 2010, 10:08:07 PM »
Wow thanks a lot Dingman, do you know where i can get parts from? chain and/or bearings.

Thanks
Logged

Offline .:.Dingman.:.

  • That CB Yapper
  • Posts: 584
Re: Transfer Case
« Reply #4 on: March 18, 2010, 10:26:17 PM »
bearings go to bc bearing by the dq on glenmore? as far as chain go to national or modern both good shops. Also feel free to invite me over for some cold ones and grease I take night school on monday wed and fri but I'm free all day .

Dingman
Logged
Pages: [1]   Go Up
« previous next »