Calgary Jeep Association

Author Topic: Anybody know how to get wood?...  (Read 4325 times)

0 Members and 1 Guest are viewing this topic.

Offline adamnigh

  • Budget Lift
  • Posts: 107
Re: Anybody know how to get wood?...
« Reply #15 on: May 19, 2010, 12:23:26 PM »
Its right for everyone that wants 36 hours of good hardwood....

Fool Injected

  • Guest
Re: Anybody know how to get wood?...
« Reply #16 on: May 19, 2010, 01:25:46 PM »
Hello I have lots of pallets if your  looking for wood.

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Anybody know how to get wood?...
« Reply #17 on: May 19, 2010, 02:11:21 PM »
Hello I have lots of pallets if your  looking for wood.

Thanks for the offer but...


Pallets are full of nails... there is no need for that in the backcountry.


Offline dac

  • That CB Yapper
  • Posts: 516
Re: Anybody know how to get wood?...
« Reply #18 on: May 19, 2010, 03:40:35 PM »
they sell wood at the camp site because you need a permit to harvest wood on public land (it''s like $12)...


I would not risk to hack up a dead stand on May long week-end at Mclean... Please be that guy. If you do; please do it in front of the SRD or RCMP... if you gonna do something stupid might as well do it right. :-[

I thought you just needed the permit to cut it and haul it to your residence.  If you cut what you need while camping I didn't think you needed a permit. ??
This is not 'Nam, this is wheeling.  There are rules.

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Anybody know how to get wood?...
« Reply #19 on: May 26, 2010, 12:22:59 PM »
I thought you just needed the permit to cut it and haul it to your residence.  If you cut what you need while camping I didn't think you needed a permit. ??

You can not cut anything. Deadfall is a big No no as it adds value to the forest floor. The only way you can cut is with a permit and i think there are restrictions on how close to a roadway you can cut.
sent from my old school rotary dial phone.