Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: JPThing Owned by JP Mag...lol  (Read 3847 times)

0 Members and 2 Guests are viewing this topic.

Offline apeman

  • Talks waaay too much!
  • Posts: 1012
  • not as grumpy
JPThing Owned by JP Mag...lol
« on: May 28, 2010, 03:35:50 PM »
For some reason JPThing decided to write a letter to JP magazine, pronouncing his ever expending knowledge of Zincy oils and thier benefits in flat tappet engines..especially the venerable Jeep 4.0l...and was again shot down...Sorry, but i almost choked when i  read this....

Quote
4.0L Oiling
Great job on the mag! I am writing to inform my fellow readers and jeepers about a potential engine-stopping issue: new oil formulations. A good friend of mine, James Vanderlinden, is an engine builder at D&W Performance, which is Calgary's (and possibly Canada's) finest and fastest performance engine building shop. He told me that over the past year or so he has seen several Jeep 4.0L inline-six engines come in with extensive damage and wear to the cam as a result of the newer oil formulations which contain little or no zinc.

According to Vanderlinden, this can spell disaster for flat tappet engines such as the Jeep inline-six. Newer engines and engines with roller cams are apparently immune to this. Vanderlinden's advice? Use diesel oil. The higher compression in diesel engines requires a more robust oil formulation and the zinc is still there, even in the newer formulations. Of course most diesel oil is 15w-40, which is a little thick for our needs, but in colder areas 10w-30 diesel oil as well as 5w-40 diesel oil can be found. Vanderlinden recommends Shell Rotella-T for older and flat tappet gasoline engines.

There are also oil additives available to overcome this shortcoming of modern oils, but they are pricey and tough to find. I hope this information helps keep more of these great old engines running strong! Long live the Jeep inline-six!
Boone Shiffman
Calgary, Alaska


And the response...

Quote
This isn't the case anymore. The blanket statement "Rotella-T" or even diesel oil as a performance-engine alternative doesn't apply anymore because even they are going low ZDDP  (low zinc) to keep from killing the particulate filters in new diesels. Rotella-T and others are now CJ-4 spec. The old diesel oils with the good additives are CJ-I spec, which is being phased out.


Just cant stop beating that dead horse...lol ;D
Logged
Getting grumpier every day.
99 XJ - It's got sum stuff ,Noel free stuff..
98 ZJ - It's just ugly, but bigger than your Rubi

Offline dac

  • That CB Yapper
  • Posts: 516
Re: JPThing Owned by JP Mag...lol
« Reply #1 on: May 28, 2010, 04:08:50 PM »
Can't be the same Boone, the one that wrote in is from Calgary, Alaska.
Logged
This is not 'Nam, this is wheeling.  There are rules.

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: JPThing Owned by JP Mag...lol
« Reply #2 on: May 28, 2010, 05:49:49 PM »
damn Yankees
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline apeman

  • Talks waaay too much!
  • Posts: 1012
  • not as grumpy
Re: JPThing Owned by JP Mag...lol
« Reply #3 on: May 28, 2010, 06:02:51 PM »
Nope...this is the same guy....they must think Calgary AB is alaska..
Logged
Getting grumpier every day.
99 XJ - It's got sum stuff ,Noel free stuff..
98 ZJ - It's just ugly, but bigger than your Rubi

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: JPThing Owned by JP Mag...lol
« Reply #4 on: May 28, 2010, 06:12:47 PM »
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline dac

  • That CB Yapper
  • Posts: 516
Re: JPThing Owned by JP Mag...lol
« Reply #5 on: May 28, 2010, 06:13:32 PM »
Quote from: apeman on May 28, 2010, 06:02:51 PM
Nope...this is the same guy....they must think Calgary AB is alaska..

I know,  I was being sarcastic.  Mixing up Canadian places is a Yank thing to do.

Funny thing is it took all of 3 seconds to google Alaska to find out it's AK.
Logged
This is not 'Nam, this is wheeling.  There are rules.

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: JPThing Owned by JP Mag...lol
« Reply #6 on: May 28, 2010, 06:51:07 PM »
James Vanderlinden, is an engine builder at D&W Performance, which is Calgary's (and possibly Canada's) finest and fastest performance engine building shop...
i wonder if he likes the exposure :o
Logged
sent from my old school rotary dial phone.

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: JPThing Owned by JP Mag...lol
« Reply #7 on: May 28, 2010, 08:03:25 PM »
Quote from: Spinalguy on May 28, 2010, 06:51:07 PM
James Vanderlinden, is an engine builder at D&W Performance, which is Calgary's (and possibly Canada's) finest and fastest performance engine building shop...
i wonder if he likes the exposure :o

You mean the exposure that blows his credibility? :o
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline apex

  • Talks waaay too much!
  • Posts: 1190
Re: JPThing Owned by JP Mag...lol
« Reply #8 on: May 28, 2010, 09:04:56 PM »
Quote from: Spinalguy on May 28, 2010, 06:51:07 PM
James Vanderlinden, is an engine builder at D&W Performance, which is Calgary's (and possibly Canada's) finest and fastest performance engine building shop...
i wonder if he likes the exposure :o
Tom, your talent for sarcasm is really under underapreciated.
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: JPThing Owned by JP Mag...lol
« Reply #9 on: May 29, 2010, 10:28:57 AM »
ha,ha,ha...good catch ;)
Logged
sent from my old school rotary dial phone.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: JPThing Owned by JP Mag...lol
« Reply #10 on: June 01, 2010, 10:13:28 AM »
Aaron, theres a simple explanation.........

JP magazine is wrong............
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline Tyn Pow

  • Budget Lift
  • Posts: 196
Re: JPThing Owned by JP Mag...lol
« Reply #11 on: June 01, 2010, 10:55:26 AM »
In the zinc thread, did anyone notice the one guy defending the theory?  Read his stroker and juggy build threads on Pirate...no budget boosts or throttle body spacers there!   I'll listen to this guy and JPthing could have a point.
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: JPThing Owned by JP Mag...lol
« Reply #12 on: June 01, 2010, 01:47:54 PM »
Quote from: Tyn Pow on June 01, 2010, 10:55:26 AM
In the zinc thread, did anyone notice the one guy defending the theory?  Read his stroker and juggy build threads on Pirate...no budget boosts or throttle body spacers there!   I'll listen to this guy and JPthing could have a point.
link to PBB?
Logged
sent from my old school rotary dial phone.

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: JPThing Owned by JP Mag...lol
« Reply #13 on: June 01, 2010, 06:12:22 PM »
 yj and corey from g.p.. If you have been to ace you have meet him. Makes me thiiink
Logged

Offline Tyn Pow

  • Budget Lift
  • Posts: 196
Re: JPThing Owned by JP Mag...lol
« Reply #14 on: June 02, 2010, 10:13:31 PM »
Quote from: morerpmfred on June 01, 2010, 06:12:22 PM
yj and corey from g.p.. If you have been to ace you have meet him. Makes me thiiink

Yup, that's the one....just search 'go fast juggy' or something like that in jeep hardcore.
Logged
Pages: [1]   Go Up
« previous next »