Calgary Jeep Association

Author Topic: tire hype & design  (Read 2535 times)

0 Members and 1 Guest are viewing this topic.

Offline bushman67

  • Budget Lift
  • Posts: 113
  • "Alright, I've got four dollars, almost five"
tire hype & design
« on: June 03, 2010, 09:19:54 PM »
Ok... sometimes I wonder about all the tire hype and design...

Goodyears's new MT/R Kevlar -- asymmetrical yes, but also "directional" tires from what I've read.  I just realized looking at pictures of my truck with them that the tread pattern direction is opposite on each side, since Goodyear put white lettering on one side & black on the other.

Is it just me, or is this odd....

Economy has me demoted to "token photo-boy"

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: tire hype & design
« Reply #1 on: June 03, 2010, 09:23:00 PM »
that's a big-arse bug on your bumper
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

wrenchead99

  • Guest
Re: tire hype & design
« Reply #2 on: June 03, 2010, 09:30:31 PM »
I've installed quite a few sets of these and nobody has noticed this (yet).  Basically it boils down to a slanted lug will not create as much road noise as a straight one, and they simply use one mold to make one tire, regardless of which side of the vehicle it's on.  they aren't technically a directional tire, although they do appear that way.  the only problems i've seen is when people mount these tires "backwards" (white letters in) and have excessive cupping due to what appears to be a smaller lug

Offline bushman67

  • Budget Lift
  • Posts: 113
  • "Alright, I've got four dollars, almost five"
Re: tire hype & design
« Reply #3 on: June 03, 2010, 09:57:30 PM »
Yes... angle blocks are always quieter, but I also thought (from that I read) that these were also directional designed tires.

Funny you mention improper mounting. I just saw a photo of backwards mounted set of these in a 4x4 mag. Can't remember if it was JP or not. I thought it odd looking with all the mud lugs on the inside.

Laugh... maybe I'm just picky and thought something was wrong... 
Economy has me demoted to "token photo-boy"

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: tire hype & design
« Reply #4 on: June 04, 2010, 03:57:33 AM »
Yes... angle blocks are always quieter, but I also thought (from that I read) that these were also directional designed tires.

Funny you mention improper mounting. I just saw a photo of backwards mounted set of these in a 4x4 mag. Can't remember if it was JP or not. I thought it odd looking with all the mud lugs on the inside.

Laugh... maybe I'm just picky and thought something was wrong... 
NOOOOO!!!!!
Those tires are NOT directional!  This topic has been beat to death on lots of offroading sites. Believe Mr.Blaine on this one. He's Savvy...
Lockers
Cuz ya can't kick arse with only one leg

Offline Zombie

  • UberWheeler
  • Posts: 398
  • Jeff the Zombie Jeep
Re: tire hype & design
« Reply #5 on: June 04, 2010, 08:01:39 AM »
I think the bug you are talking about is the block heater plug.
 ;)
97 Red XJ, 4.5", 31" mud's, ARB front, 9500lb winch, bushwhacker's, warn sliders, HnT SYE and CV drive shaft - written off and sold for parts :(

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: tire hype & design
« Reply #6 on: June 04, 2010, 11:30:35 AM »
Asymmetrical, not directional - or so I hear. I hear that these tires are rich in zinc as well.  ;)
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline Immortal

  • Talks waaay too much!
  • Posts: 3463
Re: tire hype & design
« Reply #7 on: June 04, 2010, 05:26:31 PM »
And they stick to the road like..... belt dressing
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!

Offline sylvrinvader

  • That CB Yapper
  • Posts: 606
  • the micro wheeler
Re: tire hype & design
« Reply #8 on: June 05, 2010, 08:27:16 PM »
And they stick to the road like..... belt dressing
omg not the belt dressing  lol
03 TJ, 33" BFG's,4:88 gears  BBoost, CB, custom front bumper,  insta/extenda trunks, rugged ridge roof rack w/basket

Offline jkrubi

  • Budget Lift
  • Posts: 262
Re: tire hype & design
« Reply #9 on: June 06, 2010, 04:25:34 PM »
Wrong thread
« Last Edit: June 06, 2010, 04:27:54 PM by jkrubi »