Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Bumper Build  (Read 4697 times)

0 Members and 2 Guests are viewing this topic.

Offline Rich99

  • Budget Lift
  • Posts: 250
Bumper Build
« on: December 05, 2010, 11:33:39 AM »
Here are some pics of the new bumper. Thanks Pook for the awesome work and craftsmanship.

I can't wait until it is done. What do you guys think - bed liner or powder coat?? I am leaning on powder coat to match my sliders.
« Last Edit: December 05, 2010, 11:36:39 AM by Rich99 »
Logged
Rich.

Offline OffRoadNewbie

  • UberWheeler
  • Posts: 378
  • I Blame Keith !!
Re: Bumper Build
« Reply #1 on: December 05, 2010, 12:54:24 PM »
Rich bedlinner for sure it will hold up to the hooks and clevises banging agaist it better then powder coat ( IMO ) not to mention Calgarys graveling (AKA Sanding ) in the winters  ;)
Logged
2006 TJ its Green !! ;)
With A BIG dent in the door......

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: Bumper Build
« Reply #2 on: December 05, 2010, 04:37:47 PM »
Quote from: OffRoadNewbie on December 05, 2010, 12:54:24 PM
Rich bedlinner for sure it will hold up to the hooks and clevises banging agaist it better then powder coat ( IMO ) not to mention Calgarys graveling (AKA Sanding ) in the winters  ;)

+1 on the bedliner. Mine's rhinolined and I've been running it since January of 2009 - so far it's holding up great. From what Pook tells me, that's the plan anyways  :)
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline specialk

  • CJA Executive
  • Talks waaay too much!
  • Posts: 3176
Re: Bumper Build
« Reply #3 on: December 05, 2010, 04:49:15 PM »
Bedliner.  I have found the DIY solutions to be a bit more brittle and considerably cheaper than the commercial applications, but easy to repair.
Logged
04 TJ Rubi

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Bumper Build
« Reply #4 on: December 07, 2010, 08:15:47 PM »
For my bumper is did alternating coats of tremclad and rubberized rocker panel spray. Come in a rattle can from Canadian Tire. Very pleased with the results. Did about 3 coats of each. Held up pretty good banging around in Moab.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Bumper Build
« Reply #5 on: December 08, 2010, 08:23:07 AM »
Save your money. Just Tremclad it. So much easier to repaint every Spring and touch ups are simple.
It looks good too. If you line x it, than you need to line x other things so it looks 'right'. If only the front bumper is line x, it will stick out and not in a good way. ;)
Logged
sent from my old school rotary dial phone.

Offline Rich99

  • Budget Lift
  • Posts: 250
Re: Bumper Build
« Reply #6 on: March 27, 2011, 05:28:02 PM »
Here is the finish up on the project. Awesome job and great results thanks to Pook!

By the way I went for Bedliner on the bumper, sliders and rear bumper as well.

« Last Edit: March 27, 2011, 05:49:02 PM by Rich99 »
Logged
Rich.

Offline specialk

  • CJA Executive
  • Talks waaay too much!
  • Posts: 3176
Re: Bumper Build
« Reply #7 on: March 27, 2011, 05:51:47 PM »
Looks good.  Will it stop trees coming through the window?
Logged
04 TJ Rubi

Offline Rich99

  • Budget Lift
  • Posts: 250
Re: Bumper Build
« Reply #8 on: March 27, 2011, 05:56:45 PM »
According to Pook its guaranteed to. It has a built in electronic force field not unlike the Starship Enterprise. Lets hope he is right.
Logged
Rich.

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: Bumper Build
« Reply #9 on: March 27, 2011, 06:15:06 PM »
Thats some amazing fab work Dana!! Cant wait to see what you come up with for the XJ! Hopefully that forcefield works for you Rich, that new window was pretty shiny :D
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline silverfox

  • That CB Yapper
  • Posts: 612
  • drawrof og nac enoyna
Re: Bumper Build
« Reply #10 on: March 27, 2011, 06:18:36 PM »
Nice work

Why is it everytime I see Pook he is under a Jeep with sparks shooting out of it?????
Logged
2018 JLU Lifted on 37's

Offline THE GOLD DIIGGER

  • UberWheeler
  • Posts: 319
  • This is cool lets see you do this.
Re: Bumper Build
« Reply #11 on: March 27, 2011, 06:24:34 PM »
Your jeep looking great NICE WORK!!!!!
Logged

Offline Bone206

  • Budget Lift
  • Posts: 197
Re: Bumper Build
« Reply #12 on: March 27, 2011, 06:33:31 PM »
looks great!
Logged
07 JK Sahara Unlimited, 1.5 spidertrax spacers, 2.5 teraflex cl, 275/70/18 duratracs, ace rock rails, black OEM  rims, safari straps roof, Cobra 29 WXBT CB
Pages: [1]   Go Up
« previous next »