Calgary Jeep Association

« previous next »
Pages: [1] 2 3   Go Down

Author Topic: Bill of Material  (Read 6849 times)

0 Members and 1 Guest are viewing this topic.

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Bill of Material
« on: January 05, 2011, 08:34:21 PM »
I'm trying to see from which vehicle my rear axle that has BOM # 603716-18 came from... supposed to be from a 1995 ram 2500 D60 FF... It is a D60FF  

The # does not show on the Dana site either


I'm getting conflicting info... and I'm just about to throw my PC out the f-ing window.

Anyone has a site  they prefer for BOMs?

Thanks in advance
Dom
Logged

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: Bill of Material
« Reply #1 on: January 05, 2011, 08:44:12 PM »
603716-18

1977 1/2- 78 F-250 3/4 Ton HD 4x2 Pick-up - Full-Float

3.73 carrier

do the search for part number in the Dana bible
http://www2.dana.com/pdf/X510-8DSD.pdf
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Bill of Material
« Reply #2 on: January 05, 2011, 08:47:03 PM »
I know but it show that axle to be a 30 spline axle...F me! ^(&*) &*^$&^#%^$&*(^*(


I have to take the diff apart...
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Bill of Material
« Reply #3 on: January 05, 2011, 08:47:57 PM »
Logged
sent from my old school rotary dial phone.

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: Bill of Material
« Reply #4 on: January 05, 2011, 08:50:30 PM »
oh i get it, you want more SCHPLINE THAN I HAVE!!!!!!!?????

prob just need a 35 spline detroit and new shafts..  or do they come with 40 spline? or bigger?
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Bill of Material
« Reply #5 on: January 05, 2011, 08:51:38 PM »
Quote from: Spinalguy on January 05, 2011, 08:47:57 PM
?
http://www2.dana.com/pdf/X510-8DSD.pdf

You just type your BOM in the "find" window on top and it looks through the 200 and some pages for you
Logged

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Bill of Material
« Reply #6 on: January 05, 2011, 08:52:35 PM »
Quote from: FiEND on January 05, 2011, 08:50:30 PM
oh i get it, you want more SCHPLINE THAN I HAVE!!!!!!!?????

prob just need a 35 spline detroit and new shafts..  or do they come with 40 spline? or bigger?

I just didn't expect to buy shafts... it was dupposed to be a 35 splines HPD60 FF


I was able to unscrew the 2 bolts that was holding the tag by hand.... may be it's not the right tag... I'll need to take them apart to double check.
« Last Edit: January 05, 2011, 08:54:38 PM by SwampSinger »
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Bill of Material
« Reply #7 on: January 05, 2011, 08:54:22 PM »
i also found this:
"My axle is BOM 603716 18. Online, I can’t find it. A trip to Six States however, and a call to spicer, yielded the proper book, and whoala! A 1977.5-78 F250 2WD FF/30 SPL. For the later 70’s, early 80’s, this is probably the common axle"

and this:

http://www.pirate4x4.com/forum/showthread.php?t=291250
Logged
sent from my old school rotary dial phone.

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: Bill of Material
« Reply #8 on: January 05, 2011, 08:54:59 PM »
poopy.  i'll come over and hug you tomorrow after work if you want.

[spoiler] please say yes, i don't wanna be home on girls night [/spoiler]
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Bill of Material
« Reply #9 on: January 05, 2011, 08:56:16 PM »
I did read these 2 threads Tom.. it's just not what I want to hear.

Thanks!!
Logged

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Bill of Material
« Reply #10 on: January 05, 2011, 08:57:58 PM »
Quote from: FiEND on January 05, 2011, 08:54:59 PM
poopy.  i'll come over and hug you tomorrow after work if you want.

[spoiler] please say yes, i don't wanna be home on girls night [/spoiler]
.. Bring the gun show...we'll move the rear axle in the garage
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Bill of Material
« Reply #11 on: January 05, 2011, 09:08:24 PM »
now that i am done researching :D i can read this thread and see that Al had the answer waaaaaay earlier :doh:
Logged
sent from my old school rotary dial phone.

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: Bill of Material
« Reply #12 on: January 05, 2011, 09:10:54 PM »
what can i say, i run dual monitors and my google is strong
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Bill of Material
« Reply #13 on: January 05, 2011, 09:11:19 PM »
LOL.. all good  brother   ;D
Logged

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: Bill of Material
« Reply #14 on: January 05, 2011, 09:11:23 PM »
Quote from: SwampSinger on January 05, 2011, 08:57:58 PM
.. Bring the gun show...we'll move the rear axle in the garage

deal my friend.  i'll even bring the smoking gun
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon
Pages: [1] 2 3   Go Up
« previous next »