Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Sandblasting  (Read 1394 times)

0 Members and 2 Guests are viewing this topic.

Offline after6queers

  • BANNED
  • Budget Lift
  • Posts: 221
Sandblasting
« on: June 16, 2011, 08:24:20 PM »
Jay has finished all the body parts on the jeep...I now need to sandblast! I was hoping to do myself but have no time plus the only place I know (consolidated) to blast yourself is $90 hr! Does anyone know any other sandblasting places?
Logged
2001 Jeep TJ - 4" Lift 35's MTZ Chanda made bumpers, fenders and sliders...still working on her!!!

Offline stroker sahara

  • UberWheeler
  • Posts: 361
Re: Sandblasting
« Reply #1 on: June 16, 2011, 11:27:41 PM »
Quote from: after6beers on June 16, 2011, 08:24:20 PM
Jay has finished all the body parts on the jeep...I now need to sandblast! I was hoping to do myself but have no time plus the only place I know (consolidated) to blast yourself is $90 hr! Does anyone know any other sandblasting places?

I just called consolidated a couple days ago and was told $110/hr. Seems a bit steep for DIY.
Logged
If you want to run with the big dogs you have to be able to pee in the tall grass.


1989 YJ SOA, 36" SX, 4.6 Stroker...

Offline esi

  • That CB Yapper
  • Posts: 633
Re: Sandblasting
« Reply #2 on: June 16, 2011, 11:28:30 PM »
Wheatland Blasting. They do good work at a fair price.
Logged
Formerly of Boots & Boost Inc
Back farming and fabricating again.

Offline JohnB

  • Budget Lift
  • Posts: 248
Re: Sandblasting
« Reply #3 on: June 17, 2011, 02:59:28 PM »
Quote from: stroker sahara on June 16, 2011, 11:27:41 PM
I just called consolidated a couple days ago and was told $110/hr. Seems a bit steep for DIY.

Actually it is cheap.  You will spend more on sand in an hour with a big machine like they use.  We have a blaster at work and I can guarantee $110 in sand is gone much faster than one hour.  You can sand blast a lot of stuff in an hour.
Logged

Offline frenchy

  • Talks waaay too much!
  • Posts: 1417
Re: Sandblasting
« Reply #4 on: June 17, 2011, 03:36:40 PM »
Quote from: JohnB on June 17, 2011, 02:59:28 PM
Actually it is cheap.  You will spend more on sand in an hour with a big machine like they use.  We have a blaster at work and I can guarantee $110 in sand is gone much faster than one hour.  You can sand blast a lot of stuff in an hour.

X2
At consolidated I did my entire jeep tub, inside & out, top & bottom in under an hour. They have a pretty good setup and equipment.
Just dump all your parts on the ground, walk around blasting, flip 'em over and carry on.
Logged
Jeep
With stuff

Offline Knox

  • That CB Yapper
  • Posts: 649
Re: Sandblasting
« Reply #5 on: June 17, 2011, 03:44:49 PM »
/seconded, it really doesn't take long with their equipment
Logged
2003 TJ
"Your TJ has the aerodynamics of a brick"
"if you lose the stick, chances are you'll lose the jeep......"

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: Sandblasting
« Reply #6 on: June 17, 2011, 04:21:47 PM »
thats good to know cuz i want to blast my CDN M101
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer
Pages: [1]   Go Up
« previous next »