Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Who will rebuild CV joints in Calgary?  (Read 6101 times)

0 Members and 5 Guests are viewing this topic.

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Who will rebuild CV joints in Calgary?
« on: September 13, 2011, 05:19:35 PM »
DSI will not
Pats Driveline will not
Danco will not
Who will?
Nissan and it will be brought in, the cv/axle, not the car.
Thanks
« Last Edit: September 13, 2011, 05:40:10 PM by Spinalguy »
Logged
sent from my old school rotary dial phone.

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: Who will rebuild CV joints in Calgary?
« Reply #1 on: September 13, 2011, 06:28:47 PM »
grand prix automotive had a rebuild shop here in Calgary and an even bigger shop in Edmonton that does custom stuff.
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Who will rebuild CV joints in Calgary?
« Reply #2 on: September 14, 2011, 08:03:07 AM »
Quote from: morerpmfred on September 13, 2011, 06:28:47 PM
grand prix automotive had a rebuild shop here in Calgary and an even bigger shop in Edmonton that does custom stuff.
Thanks but they send them out to Winnipeg.

Anyone else have input?
Logged
sent from my old school rotary dial phone.

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: Who will rebuild CV joints in Calgary?
« Reply #3 on: September 14, 2011, 10:10:09 AM »
Pats rebuilt mine?
Logged

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: Who will rebuild CV joints in Calgary?
« Reply #4 on: September 14, 2011, 10:28:23 AM »
Quote from: AV.NINE on September 14, 2011, 10:10:09 AM
Pats rebuilt mine?

pats rebuilt your CV drive shaft not CV axle ..      

what needs to be done .. CV shafts are pretty simple you probably can buy the parts at auto value and do it your self .. its just a rubber boot and 3 rollers that spin on a spider and a few snap rings  in the assembly

google it im sure someone out there has a whole write up on it
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: Who will rebuild CV joints in Calgary?
« Reply #5 on: September 14, 2011, 12:32:30 PM »
Quote from: Rubi03 jef on September 14, 2011, 10:28:23 AM
pats rebuilt your CV drive shaft not CV axle ..      

what needs to be done .. CV shafts are pretty simple you probably can buy the parts at auto value and do it your self .. its just a rubber boot and 3 rollers that spin on a spider and a few snap rings  in the assembly

google it im sure someone out there has a whole write up on it


I assumed the cv joint was on the driveshaft , now that I'm onboard, can't you buy a new shaft complete with the cv? If I remember from college they aren't too expensive.
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Who will rebuild CV joints in Calgary?
« Reply #6 on: September 14, 2011, 02:51:00 PM »
Quote from: AV.NINE on September 14, 2011, 12:32:30 PM
I assumed the cv joint was on the driveshaft , now that I'm onboard, can't you buy a new shaft complete with the cv? If I remember from college they aren't too expensive.
you could but NO ONE has a cross reference for the CV joint. Its my wifes skyline. i have tried every internet resource and no one has it. i will pull it out, count the splines inner and outer and check the length at full compression. And hope Napa has the part.
Logged
sent from my old school rotary dial phone.

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: Who will rebuild CV joints in Calgary?
« Reply #7 on: September 14, 2011, 02:58:32 PM »
Quote from: Spinalguy on September 14, 2011, 02:51:00 PM
you could but NO ONE has a cross reference for the CV joint. Its my wifes skyline. i have tried every internet resource and no one has it. i will pull it out, count the splines inner and outer and check the length at full compression. And hope Napa has the part.


call my brother at TOP SPEED auto & tuning . 403-250-6690
they only deal with imports
ask for WAYNE  or JOE 

waynes my brother im sure he can help you if not get you a new one for cheap

Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Who will rebuild CV joints in Calgary?
« Reply #8 on: September 14, 2011, 03:09:38 PM »
Quote from: Rubi03 jef on September 14, 2011, 02:58:32 PM

call my brother at TOP SPEED auto & tuning . 403-250-6690
they only deal with imports
ask for WAYNE  or JOE  

waynes my brother im sure he can help you if not get you a new one for cheap


How crazy is that? i have actually been speaking with Joe. He got me the boots which i picked up today from him and i will bring him the joint in the a.m. to see if we can do anything. i can get a new one for $800! Gulp.
Logged
sent from my old school rotary dial phone.

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Who will rebuild CV joints in Calgary?
« Reply #9 on: September 15, 2011, 08:40:04 PM »
Your bro is cool 8)
Hopefully, they can help me ...err...my wife out.
Joe's Skyline is the nicest one i have ever seen. Clean, not over he top gaudy and just plain SIK!
Logged
sent from my old school rotary dial phone.

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: Who will rebuild CV joints in Calgary?
« Reply #10 on: September 15, 2011, 08:42:24 PM »
Ya it's petty sweet.   To bad he doesn't drive it like it was built

That car puts down serious HP.  But I think he's worried abou hurting it
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Who will rebuild CV joints in Calgary?
« Reply #11 on: September 15, 2011, 09:46:18 PM »
Yep, when you have NOS in the back of a Skyline, you know it lays down some serious numbers :o
Logged
sent from my old school rotary dial phone.

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: Who will rebuild CV joints in Calgary?
« Reply #12 on: September 15, 2011, 11:00:05 PM »
hell ya its damn nice ..
\
my brother just finished building his RB25 240 ..  well its never finished but engine is in and it runs 12's on the 1/4 mile  not tuned

so im sure he can take at least another second or 2 off that with a new computer and some dyno time

Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer
Pages: [1]   Go Up
« previous next »