Calgary Jeep Association

« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: Project fugly payoff  (Read 11137 times)

0 Members and 1 Guest are viewing this topic.

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re: Project fugly payoff
« Reply #15 on: May 10, 2012, 06:46:57 PM »
I'm guessing by your handle you have a yj. Another WRONGler on the trail would be nice. I hate being the only 1 ;)
Logged

Offline AstraX

  • That CB Yapper
  • Posts: 863
Re: Re: Project fugly payoff
« Reply #16 on: May 10, 2012, 08:32:15 PM »
Sorry buddy. Have to work. Have fun

Sent from my Galaxy Nexus using Tapatalk 2
Logged

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Project fugly payoff
« Reply #17 on: May 10, 2012, 08:39:28 PM »
Got the winch on so I'm ready to go!!
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers

Offline Spike

  • Baby Wheeler
  • Posts: 52
  • Moab
Re: Project fugly payoff
« Reply #18 on: May 10, 2012, 09:05:05 PM »
Nice set up....what kind of winch and where did you get the winch plate from?

Aslo, what is the plan for Sat?  I do not want to hit it hard but I would love to get out....

Stock JKU Rubicon (stock-no winch or CB yet)
Logged

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Project fugly payoff
« Reply #19 on: May 10, 2012, 09:23:10 PM »
Thanks. It's a KingOne TDS 9.5i winch, got it from Chanda.

The winch plate is from Rough Country with the Dring brackets.

Sounds like there will be at least 3 people with winches so you should be good.
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re: Project fugly payoff
« Reply #20 on: May 10, 2012, 09:25:59 PM »
Dude you have a rubi your gonna be just fine.  I'm sure 1 person with no CB will be ok.  You really should get one though.  Not only for safety but being able to talk to one another is half the fun.
Logged

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: Project fugly payoff
« Reply #21 on: May 10, 2012, 09:29:48 PM »
Quote from: BUKI on May 10, 2012, 09:25:59 PM
being able to talk to one another is half the fun.

You mean "half the people can talk to each other....the other half either make noises on the CB like Charlie Brown's teacher, or can't hear anything."
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline Jrama

  • That CB Yapper
  • Posts: 923
Re: Project fugly payoff
« Reply #22 on: May 10, 2012, 09:47:33 PM »
Quote from: w squared on May 10, 2012, 09:29:48 PM
You mean "half the people can talk to each other....the other half either make noises on the CB like Charlie Brown's teacher, or can't hear anything."

Yeah..... I'm just going to quote that for truth.

From the sounds of things I might have to re-think the trails a little.....and bring a chainsaw :o

Those Minivans aren't very agile in the woods.....trees are a real bitch... Especially the ones you can easily drive around .....Just ask Anton ;D
« Last Edit: May 10, 2012, 09:50:57 PM by Jrama »
Logged

Offline Ddub1973

  • Budget Lift
  • Posts: 112
Re: Project fugly payoff
« Reply #23 on: May 11, 2012, 11:07:57 AM »
Quote from: Kanueh on May 10, 2012, 08:39:28 PM
Got the winch on so I'm ready to go!!

How much did this set you back?  I need a winch and a bumper but the budget might not allow both so the winch has to come first.
Logged
DDUB OIIIIO

2013 JKUR

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Project fugly payoff
« Reply #24 on: May 11, 2012, 11:53:28 AM »
Same here. Did the winch first and then will do a bumper after the lift and tires. The plate was a couple hundred with shipping and it's the only one I could find with D-rings. Be aware that if you buy this Plate the bolts they ship to attach the roller are too big for the holes in plate. I read someone else's post that said the same thing so you will either go get me bolts or drill out the plate.

The winch was about 550-600 when they were having a sale.
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re: Project fugly payoff
« Reply #25 on: May 11, 2012, 07:22:12 PM »
Hey if there is anyone coming tomorrow who has experience tuning a cb could you come 15 min earlier.  I'll be at the store for 8:30ish 8)
Logged

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Project fugly payoff
« Reply #26 on: May 11, 2012, 07:24:09 PM »
I just got a new antenna and need to tune mine as well so I'll bring my meter as well.
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers

Offline Jrama

  • That CB Yapper
  • Posts: 923
Re: Project fugly payoff
« Reply #27 on: May 12, 2012, 06:33:53 PM »
After a rough start which involving pulling a JK out of a pit for 2 1/2 hours it was a good day. I think Mr.Buki got everything he bargained for on this run  ;D.
Logged

Offline 1993yj

  • Baby Wheeler
  • Posts: 92
Re: Project fugly payoff
« Reply #28 on: May 12, 2012, 07:26:59 PM »
i had a great time today ,thanks for all the fun
Logged

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Project fugly payoff
« Reply #29 on: May 12, 2012, 07:54:26 PM »
Great day guys! Had blast out there, looking forward tithe next one.
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers
Pages: 1 [2] 3   Go Up
« previous next »