Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Dana 44a skid and truss  (Read 1658 times)

0 Members and 3 Guests are viewing this topic.

Offline WJBEAST

  • Stocker
  • Posts: 14
Dana 44a skid and truss
« on: March 21, 2013, 08:10:30 PM »
I know a lot people don't like the Dana 44a.. That's what my WJ has.. I want to run 35's this year. I have a line on a new trust and skid for my 44a and was just wondering what you guys think.. My plan is to trust and skid my 44a, buy an open carrier and put an Aussie locker in it. With upgraded shafts.. Should hold up shouldn't it??
Logged
02 Grand Cherokee- 6.5"Lift- IRO front long arms- 33" Claws- Iceland Offroad flares and winch bumper

Offline WJBEAST

  • Stocker
  • Posts: 14
Re: Dana 44a skid and truss
« Reply #1 on: March 21, 2013, 08:11:20 PM »
Probably regard to 4.10's too..
Logged
02 Grand Cherokee- 6.5"Lift- IRO front long arms- 33" Claws- Iceland Offroad flares and winch bumper

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: Dana 44a skid and truss
« Reply #2 on: March 21, 2013, 08:14:31 PM »
Plenty have done this, I'm running 315's on a 44a with no issues. I'll truss it though as well before I lock and really wheel it.

Which engine do you have?
Logged

Offline WJBEAST

  • Stocker
  • Posts: 14
Re: Dana 44a skid and truss
« Reply #3 on: March 21, 2013, 08:19:29 PM »
Whiteout is that you Fraser? I have the V8 in mine.. I went wheeling with you in Waparious a couple years back.. I used to be Jeepers26 on this forum but forgot my password cause I hadn't been on in quite a while..lol
Logged
02 Grand Cherokee- 6.5"Lift- IRO front long arms- 33" Claws- Iceland Offroad flares and winch bumper

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: Dana 44a skid and truss
« Reply #4 on: March 21, 2013, 08:25:30 PM »
Yes it is lol.

Brad right? I should have recognized all the Iceland stuff.
Logged

Offline WJBEAST

  • Stocker
  • Posts: 14
Re: Dana 44a skid and truss
« Reply #5 on: March 21, 2013, 08:31:30 PM »
Yes its..lol. I haven't done much wheeling the last couple years.. A lot of stuff goin on.. Divorce n crap..lol.. But I've got the bug bad again and gonna get this thing ready for some fun this summer! Hope to see you out there this year Fraser! cheers!
Logged
02 Grand Cherokee- 6.5"Lift- IRO front long arms- 33" Claws- Iceland Offroad flares and winch bumper

Offline WJBEAST

  • Stocker
  • Posts: 14
Re: Dana 44a skid and truss
« Reply #6 on: March 21, 2013, 08:36:15 PM »
And Fraser there is a guy on the Mallcrawlin forum named Quadratokn who has designed and is selling a 44a truss and skid.. Introductory price of $185 for the truss and $85 for the skid if your interested..
Logged
02 Grand Cherokee- 6.5"Lift- IRO front long arms- 33" Claws- Iceland Offroad flares and winch bumper

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Dana 44a skid and truss
« Reply #7 on: March 21, 2013, 09:48:33 PM »
Should be ok brad but just the truss is really needed  they addressed some of the issues wih ZJ 44as and fixed it for WJs trus it lock it beat it:)
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline WJBEAST

  • Stocker
  • Posts: 14
Re: Dana 44a skid and truss
« Reply #8 on: March 21, 2013, 09:52:46 PM »
Jackstandjohnny I'm just worried about banging the crap out of the bottom of that aluminium pumpkin.. I'm not that easy on my rig ;D.. I figure for the extra $85 why not..
« Last Edit: March 21, 2013, 09:54:21 PM by WJBEAST »
Logged
02 Grand Cherokee- 6.5"Lift- IRO front long arms- 33" Claws- Iceland Offroad flares and winch bumper

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Dana 44a skid and truss
« Reply #9 on: March 22, 2013, 09:04:07 AM »
then do it, whats 85$? lol

hve you looked into diff covers for it too? 
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Dana 44a skid and truss
« Reply #10 on: March 22, 2013, 10:15:21 AM »
Have you priced out a ZJ rear bracket kit? Probably about the same as what you quoted for truss and skid. Then put in what ever you want with any locker you want.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Dana 44a skid and truss
« Reply #11 on: March 22, 2013, 11:28:27 AM »
Quote from: cLAY on March 22, 2013, 10:15:21 AM
Have you priced out a ZJ rear bracket kit? Probably about the same as what you quoted for truss and skid. Then put in what ever you want with any locker you want.

the WJs use the wishbone three link in the rear clay; probalby be a lot of work to make a ZJ kit work i think.

you could run a claytons rear kit, and then any axle you want :)
i think Dave (brokenaxle) is running claytons rear long arms and JK axles
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Dana 44a skid and truss
« Reply #12 on: March 22, 2013, 12:27:05 PM »
Whoops! Sorry about that. Missed the part about it being a WJ.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline comanche killer

  • UberWheeler
  • Posts: 372
  • Aaron
Re: Dana 44a skid and truss
« Reply #13 on: April 12, 2013, 09:31:39 PM »
I was runnin a welded d44a in the rear zj on 36" iroks
And u can ask any of the guys on here I run my rig
Harder then it should off been. and ran it in the highriders chanellge
Last year and the d44a held up ended snaping
The front d30 in half lo
Should of trussed them loll
The aluminum center had some battle scares but was not bad at all
I be runin  a FF14 bolt and d60 on 40's  now lol
That have been trussed

Trussing a diff is always better then not trussing a diff
Just my 2 cents  ps : nice wj ya got there sir
« Last Edit: April 12, 2013, 09:35:10 PM by comanche killer »
Logged
95 3/4 ton Chev  dailydriver/heavy hauler
97 green MZJ custom 4link rear/3link front, FF 14 bolt rear welded, D 60 front, ax-15, np-231,custom rollcage, half doors, PSC hydro assist 14"kings 40"boggers
Pages: [1]   Go Up
« previous next »