Calgary Jeep Association

Author Topic: Steering box swap  (Read 3232 times)

0 Members and 4 Guests are viewing this topic.

Offline EviLAnTo

  • Baby Wheeler
  • Posts: 72
Steering box swap
« on: February 26, 2014, 12:42:13 PM »
Like all tj's my poor steering box is starting to go along with my nerves on the highway, so ive been looking online and im wondering
if its worth swapping out for a Durango steering box from a junkyard or just buying a brand new one. im a student so im looking for more of "less pricey"
alternative. Any thoughts/tips?

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: Steering box swap
« Reply #1 on: February 26, 2014, 01:48:40 PM »
Like all tj's my poor steering box is starting to go along with my nerves on the highway, so ive been looking online and im wondering
if its worth swapping out for a Durango steering box from a junkyard or just buying a brand new one. im a student so im looking for more of "less pricey"
alternative. Any thoughts/tips?

Are you sure its the box itself? I just had problems with my steering and I was 100% positive it way excessive play in the box. I was just about to order one until I checked the track-bar bushing at the axle end, it had about 1/8" play and after a new TB was installed the steering tightened right back up to like new.
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306

 Resident prick is my job and it took me ten years to earn that title

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Steering box swap
« Reply #2 on: February 26, 2014, 02:20:15 PM »
after you check all that stuff out if you have determined it is indeed your steering gear (steering box) i have one off my ZJ that should bolt right up, and its solid.  pm me if you're interested. 50$
~ rescue green JKUR on 35s.  typical rubicon build

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: Steering box swap
« Reply #3 on: February 26, 2014, 05:36:52 PM »
And if you decide on the upgrade with a durango box, just buy new.
Its a roll of the dice grabbing one from the junkyard; you can end up going through 5 bad ones before you find a good one. You won't know for sure until you've installed it in your vehicle.

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: Steering box swap
« Reply #4 on: February 26, 2014, 06:58:16 PM »
And if you decide on the upgrade with a durango box, just buy new.
Its a roll of the dice grabbing one from the junkyard; you can end up going through 5 bad ones before you find a good one. You won't know for sure until you've installed it in your vehicle.

That doesn't sound like you Pip! Junkyard parts ftw bro!!  :P
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Steering box swap
« Reply #5 on: February 26, 2014, 11:28:34 PM »
That doesn't sound like you Pip! Junkyard parts ftw bro!!  :P

omg x2.

who is this guy? lol

I can't wait to hit the JY this weekend. -25? hells ya should be nobody there to compete for parts hahaha
~ rescue green JKUR on 35s.  typical rubicon build

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: Steering box swap
« Reply #6 on: February 27, 2014, 07:11:22 AM »
That doesn't sound like you Pip! Junkyard parts ftw bro!!  :P

Must be a sign of me growing up :(

I actually bought my Durango steering box brand new for Limey.

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: Steering box swap
« Reply #7 on: March 17, 2014, 10:13:11 AM »
omg x2.

who is this guy? lol

I can't wait to hit the JY this weekend. -25? hells ya should be nobody there to compete for parts hahaha

Haha! Yup....been there done that a couple times... brrrrrrrrr.


Must be a sign of me growing up :(

I actually bought my Durango steering box brand new for Limey.

Where at and how much did it run ya? My steering box is official pooched as well...I think the sticky rocks in MOAB were the last straw
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline jpthing

  • UberWheeler
  • Posts: 389
  • I like things with wheels.
Re: Steering box swap
« Reply #8 on: March 17, 2014, 07:49:52 PM »
I saw rock auto had rebuilt tj boxes for around $100
'97 TJ, 5" lift, 35's "Sprout"
'95 Xj, 4" lift, 33's Sold to the Bagman
'10 JK unlimited

"Whether you think you can or think you can't...you're right."
-Henry Ford

I'm finally over the Jeep bike debacle..

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Steering box swap
« Reply #9 on: March 17, 2014, 10:03:30 PM »
i bought one of these for my Dodge after reading many reviews. They also have jeep ones...
http://www.redheadsteeringgears.com/
sent from my old school rotary dial phone.

Offline Black Betty

  • UberWheeler
  • Posts: 453
Re: Steering box swap
« Reply #10 on: March 23, 2014, 08:13:57 AM »
And if you decide on the upgrade with a durango box, just buy new.
Its a roll of the dice grabbing one from the junkyard; you can end up going through 5 bad ones before you find a good one. You won't know for sure until you've installed it in your vehicle.

Although pnp has a 30 day exchange policy, do you want to keep going back till you find a good working box?  Im curious on the Durango box too.  In my application I've read the draglink may require shortening, but i cannot confirm this.  I was going to swap in the box when i change out my dayner tirty.  I like the quicker steering.
06 wk-soccer mom mobile aka Betty J
99 xj- Black Betty, 2" OME lift
94 yj- needs to be lifted aka Betty Rubble

Stupid hurts

Offline EviLAnTo

  • Baby Wheeler
  • Posts: 72
Re: Steering box swap
« Reply #11 on: April 09, 2014, 04:19:24 PM »
Hey guys thanks for all the help! Im sorry for the extremely late response, ive been getting into the last leg of school.
so i narrowed it down to the steering box i checked the joints and rod ends everything seems fine, along with the track bar shes on pretty tight  ;)
when i lifted up the jeep up i noticed i subtle "clunk" when changing direction with the steering wheel and noticed a little bit of play coming from the
steering box drop arm (not the right word i know) that connects to the rods. im wondering if tightening the box with an allan key will work or
if i should purchase a new box.

thoughts?

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: Steering box swap
« Reply #12 on: April 09, 2014, 04:43:35 PM »
The steering box is attached to the frame with 3 bolts. Make sure these are TIGHT! From personal experience, I have known these bolts to back-out and loosen up from time-to-time.

Also, check your steering box brace. Sometimes they crack or even break. If this is the case, you can order after-market braces (or even build your own if you know how).

Offline JENSSEN

  • Talks waaay too much!
  • Posts: 1606
    • Racing For The Cure
Re: Steering box swap
« Reply #13 on: April 09, 2014, 09:01:56 PM »
This may be just me but I did find the Durango box to be beefier, shorter lock to lock , but I did notice that it seemed like I lost Turing radius,.. Anyone else?
www.racingforthecure.ca


Definition of Link to this definition of Blasphemy
1. [n] blasphemous behavior; the act of depriving something of its sacred character;

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: Steering box swap
« Reply #14 on: April 09, 2014, 09:38:00 PM »
You may be right Jenssen. I think I also lost a bit of turning radius with the Durango box too. Didn't seem like a huge loss though. Bigger tires seem to hurt the turning radius more so than the Durango steering box.